40184

Active

Inductive sensor

All alternatives

Technical parameters

Power
No-load supply current	I 0 \| ≤ 20 mA
Off-state current	I r \| 0 ... 0.5 mA typ. 0.1 µA at 25 °C
Operating current	I L \| 0 ... 200 mA
Operating voltage	U B \| 10 ... 30 V
Operating voltage indicator	LED, green
Voltage drop	U d \| ≤ 2 V
AC and DC characteristics
Switching frequency	f \| 0 ... 560 Hz
Time delay before availability	t v \| 80 ms
Environment and package
Ambient temperature	-25 ... 85 °C (-13 ... 185 °F)
Height	40 mm
Height 40 mm Width 40 mm Length 118 mm	Height \| 40 mm \| Width \| 40 mm \| Length \| 118 mm
Other
Actual operating distance	s r \| 13.5 ... 16.5 mm typ. 15 mm
Assured operating distance	s a \| 0 ... 12.15 mm
CCC approval	CCC approval / marking not required for products rated ≤36 V
Connection type	screw terminals
Core cross section	≤ 2.5 mm 2
Degree of protection	IP68 / IP69K
Diagnostic Coverage (DC)	0 %
Housing base	plastic
Housing material	PA/metal with epoxy powder coating
Hysteresis	H \| typ. 5 %
Installation	flush
Length	118 mm
Mass	225 g
Mission Time (T M )	20 a
MTTF d	1510 a
Note	Tightening torque: 1.8 Nm (housing)
Output polarity	DC
Output type	NPN
Rated operating distance	s n \| 15 mm
Reduction factor r 304	0.74
Reduction factor r Al	0.33
Reduction factor r Brass	0.41
Reduction factor r Cu	0.31
Reverse polarity protection	reverse polarity protected
Sensing face	PA
Short-circuit protection	pulsing
Standards	EN IEC 60947-5-2
Standards EN IEC 60947-5-2	Standards \| EN IEC 60947-5-2
Switching function	Normally open (NO)
Switching state indicator	LED, yellow
UL approval	cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 200 mA
Width	40 mm

Documents

No documents are linked to this part yet.