All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| No-load supply current | I 0 | ≤ 20 mA |
| Operating voltage | U B | 10 ... 30 V DC , ripple 10 % SS |
| AC and DC characteristics | |
| Load impedance | 0 ... 300 Ω at U B > 10 V; 0 ... 500 Ω at U B > 15 V |
| Repeat accuracy | ± 0.5 % of full-scale value |
| Resolution | 0.4 mm at max. sensing range |
| Response delay | approx. 100 ms |
| Transducer frequency | approx. 255 kHz |
| Environment and package | |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Temperature influence | ± 1.5 % of full-scale value |
| Other | |
| Adjustment range | 70 ... 800 mm |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Connection type | Connector plug M12 x 1 , 4-pin |
| Dead band | 0 ... 50 mm |
| Default setting | evaluation limit A1: 70 mm evaluation limit A2: 800 mm |
| Degree of protection | IP67 |
| Deviation of the characteristic curve | ± 1 % of full-scale value |
| Diameter | 18 mm |
| Housing | brass, nickel-plated |
| Housing brass, nickel-plated Transducer epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT | Housing | brass, nickel-plated | Transducer | epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT |
| Input type | 1 program input lower evaluation limit A1: -U B ... +1 V, upper evaluation limit A2: +4 V ... +U B input impedance: > 4.7 kΩ, pulse duration: ≥ 1 s |
| LED green | Power on |
| LED red | solid red: Error red, flashing: program function, object not detected |
| LED yellow | solid yellow: object in the evaluation range yellow, flashing: program function, object detected |
| Length | 57 mm |
| Length 57 mm Diameter 18 mm | Length | 57 mm | Diameter | 18 mm |
| Mass | 25 g |
| Output type | 1 analog output 4 ... 20 mA, short-circuit/overload protected |
| Sensing range | 50 ... 800 mm |
| Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 EN 60947-5-7:2003 IEC 60947-5-7:2003 |
| Standards EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 EN 60947-5-7:2003 IEC 60947-5-7:2003 | Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 EN 60947-5-7:2003 IEC 60947-5-7:2003 |
| Standard target plate | 100 mm x 100 mm |
| Transducer | epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT |
| UL approval | cULus Listed, Class 2 Power Source |
Documents
No documents are linked to this part yet.