Pepperl+Fuchs, Inc.Germany
39515
ActiveFiber optic sensor for glass fiber optics and plastic fiber optics
All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| No-load supply current | I 0 | ≤ 30 mA |
| Operating voltage | U B | 10 ... 30 V DC |
| Switching current | max. 100 mA , resistive load |
| Switching voltage | max. 30 V DC |
| Voltage drop | U d | ≤ 2 V DC at 100 mA ; ≤ 0.7 V at 10 mA |
| AC and DC characteristics | |
| Repeat accuracy | R | ≤ 0.5 % of adjusted sensor range |
| Ripple | 10 % |
| Switching frequency | f | Standard mode: 3 kHz , High speed mode: 6 kHz , High resolution: 250 Hz |
| Environment and package | |
| Ambient temperature | -10 ... 55 °C (14 ... 131 °F) |
| Height | 34.5 mm |
| Height 34.5 mm Width 9 mm Depth 62.3 mm | Height | 34.5 mm | Width | 9 mm | Depth | 62.3 mm |
| Storage temperature | -20 ... 70 °C (-4 ... 158 °F) |
| Other | |
| Ambient light limit | 10000 Lux |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Connection | 200 mm, PVC cable with M8 connector, 4-pin |
| Control elements | Potentiometer for setting sensitivity slide switch 2 positions: light/dark switching slide switch 3 positions: timer function - timer off, on delay 40 ms, off-delay 40 ms slide switch 3 positions: operating mode - normal, high speed , high resolution |
| Degree of protection | IP50 |
| Depth | 62.3 mm |
| Detection range | up to 450 mm (KLE-C01-2,2-2,0-K116) |
| Diagnostic Coverage (DC) | 0 % |
| Function indicator | LED yellow: static illumination switching state, flashes when falling short of the operating reserve |
| Housing | PC |
| Housing PC | Housing | PC |
| Light source | LED |
| Light type | modulated visible red light , 660 nm |
| Mass | 45 g |
| Mission Time (T M ) | 20 a |
| MTTF d | 690 a |
| Operation indicator | LED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz) |
| Product standard | EN 60947-5-2 |
| Response time | Standard mode: 160 µs , High speed mode: 80 µs , High resolution: 2 ms |
| Sensor range | up to 150 mm (KLR-C02-2,2-2,0-K146) |
| Signal output | 1 NPN, short-circuit protected open collector |
| Stability alarm output | 1 NPN, short-circuit protected open collector |
| Switching type | light/dark on, switchable |
| UL approval | cULus Listed, Class 2 Power Source, Type 1 enclosure |
| Width | 9 mm |
Documents
No documents are linked to this part yet.