39415

Active

Inductive sensor

All alternatives

Technical parameters

Power
Off-state current	I r \| ≤ 1.3 mA
Rated operating current	I e \| 8 ... 200 mA AC/DC
Rated operating voltage	U e \| 20 ... 250 V AC/DC
Voltage drop	U d \| ≤ 7 V
AC and DC characteristics
Switching frequency	f \| 30 Hz
Environment and package
Ambient temperature	-25 ... 70 °C (-13 ... 158 °F)
Other
Actuating element	Ferrous targets
Assured operating distance	s a \| 0 ... 1.62 mm
CCC approval	Certified by China Compulsory Certification (CCC)
Connection type	Connector plug
Degree of protection	IP67 / IP68 / IP69K - cordset dependent according to cable specification
Diameter	12 mm
Error indicator	LED, green/yellow (Alternate Flashing) - Short circuit/overload indication
Housing material	Stainless steel 1.4305 / AISI 303
Hysteresis	H \| 3 ... 15 typ. 5 %
Installation	flush
Length	85 mm
Length 85 mm Diameter 12 mm	Length \| 85 mm \| Diameter \| 12 mm
Number of pins	3
Operation indicator	Dual LED Green: power Yellow: output
Output polarity	AC/DC
Output type	Two-wire
Rated operating distance	s n \| 2 mm
Reduction factor r 304	0.4 - 0.7
Reduction factor r Al	0
Reduction factor r Brass	0
Reduction factor r Cu	0
Reduction factor r St37	1
Reverse polarity protection	yes
Sensing face	Stainless steel 1.4305 / AISI 303
Short-circuit protection	yes
Standards	EN IEC 60947-5-2
Standards EN IEC 60947-5-2	Standards \| EN IEC 60947-5-2
Switching function	Normally open (NO)
Threading	1/2"-20 UN
Threading 1/2"-20 UN Number of pins 3	Threading \| 1/2"-20 UN \| Number of pins \| 3
UL approval	cULus Listed Load Type: Resistive Enclosure Type Rating: Type 1 Supply/Switching Voltage: 250 V AC/DC Output Switching Current: 200 mA

Documents

No documents are linked to this part yet.