38799

Active

Retroreflective sensor with polarization filter with foreground suppression

All alternatives

Technical parameters

Power
No-load supply current	I 0 \| ≤ 40 mA
Operating voltage	U B \| 10 ... 30 V DC
Switching current	max. 200 mA
Switching voltage	max. 30 V DC
AC and DC characteristics
Ripple	10 %
Switching frequency	f \| 1000 Hz
Environment and package
Ambient temperature	-40 ... 60 °C (-40 ... 140 °F)
Height	88 mm
Height 88 mm Width 25.8 mm Depth 54.3 mm	Height \| 88 mm \| Width \| 25.8 mm \| Depth \| 54.3 mm
Storage temperature	-40 ... 60 °C (-40 ... 140 °F)
Other
Ambient light limit	80000 Lux
Connection	with 0.3 m fixed cable and M12 connector, 4-pin
Degree of protection	IP67
Depth	54.3 mm
Diagnostic Coverage (DC)	0 %
Diameter of the light spot	approx. 160 mm at a distance of 8 m
Effective detection range	0 ... 8 m
Function indicator	2 LEDs yellow, light up when light beam is free, flash when falling short of the operating reserve, are off when light beam is interrupted
Housing	Plastic ABS
Housing Plastic ABS Optical face plastic	Housing \| Plastic ABS \| Optical face \| plastic
Light source	LED
Light type	modulated visible red light , 660 nm
Mass	70 g
Mission Time (T M )	20 a
MTTF d	690 a
Opening angle	emitter 1.2° receiver 2°
Operation indicator	LED green
Optical face	plastic
Polarization filter	yes
Product standard	EN 60947-5-2
Reference target	H60 reflector 40 mm x 60 mm
Reflector distance	0.5 ... 8 m (blind range 0 ... 0.2 m faded out)
Response time	0.5 ms
Signal output	2 PNP, complementary, short-circuit protected, reverse polarity protected , open collectors
Switching type	light-on
Threshold detection range	12 m
UL approval	E87056 , cULus Listed , class 2 power supply , type rating 1
Width	25.8 mm

Documents

No documents are linked to this part yet.