All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| No-load supply current | I 0 | ≤ 55 mA |
| Operating voltage | U B | 10 ... 30 V DC , ripple 10 % SS |
| Rated operating current | I e | 200 mA , short-circuit/overload protected |
| Voltage drop | U d | ≤ 3 V |
| AC and DC characteristics | |
| Repeat accuracy | ≤ 1 % of full-scale value |
| Response delay | ≤ 50 ms |
| Switching frequency | f | max. 10 Hz |
| Transducer frequency | approx. 380 kHz |
| Environment and package | |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Height | 31 mm |
| Height 31 mm Width 105 mm Length 25 mm | Height | 31 mm | Width | 105 mm | Length | 25 mm |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Temperature influence | ± 1.5 % of full-scale value |
| Other | |
| Adjustment range | 50 ... 500 mm |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Common mode operation | max. 100 Hz |
| Common mode operation max. 100 Hz Multiplex operation ≤ 100 / n Hz, n = number of sensors | Common mode operation | max. 100 Hz | Multiplex operation | ≤ 100 / n Hz, n = number of sensors |
| Connection type | Connector plug M12 x 1 , 5-pin |
| Dead band | 0 ... 30 mm |
| Degree of protection | IP65 |
| Housing | ABS |
| Housing ABS Transducer epoxy resin/hollow glass sphere mixture; polyurethane foam | Housing | ABS | Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam |
| Input type | 1 program input, switching point A1: -U B ... +1 V, switching point A2: +4 V ... +U B input impedance: > 4.7 kΩ, program pulse: ≥ 1 s |
| LED green | solid green: monitoring system green flashing: program function |
| LED red | flashing: normal mode: error Program function: no object detected permanently: Program mode, object uncertain |
| LED yellow | indication of the switching state flashing: program function object detected |
| Length | 25 mm |
| Mass | 100 g |
| Multiplex operation | ≤ 100 / n Hz, n = number of sensors |
| Output type | 1 switch output E4, NPN, NO/NC |
| Range hysteresis | H | ≤ 1 % of the set operating distance |
| Sensing range | 30 ... 500 mm |
| Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 |
| Standards EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 | Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 |
| Standard target plate | 100 mm x 100 mm |
| Synchronization | 1 synchronous input 0 level: U B ...+1 V 1 level: +4 V...+U B input impedance: > 12 KOhm synchronization pulse: 0.1 ... 8 ms |
| Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam |
| UL approval | cULus Listed, Class 2 Power Source |
| Width | 105 mm |
Documents
No documents are linked to this part yet.