All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| No-load supply current | I 0 | ≤ 40 mA |
| Operating voltage | U B | 10 ... 30 V DC , class 2 |
| Switching current | max. 100 mA |
| Switching voltage | max. 30 V DC |
| AC and DC characteristics | |
| Ripple | 10 % |
| Switching frequency | f | 125 Hz |
| Environment and package | |
| Ambient temperature | -25 ... 60 °C (-13 ... 140 °F) |
| Height | 88 mm |
| Height 88 mm Width 25.8 mm Depth 54.3 mm | Height | 88 mm | Width | 25.8 mm | Depth | 54.3 mm |
| Storage temperature | -40 ... 75 °C (-40 ... 167 °F) |
| Other | |
| Ambient light limit | 50000 Lux |
| Background suppression | max. + 10 % of the upper limit of the detection range |
| Black-white difference (6 %/90 %) | < 35 % at 1200 mm sensor range |
| Connection | with 0.2 m fixed cable and 4-pin, M12 connector |
| Control elements | Sensing range adjuster |
| Degree of protection | IP65 |
| Depth | 54.3 mm |
| Detection range | 30 ... 1200 mm , adjustable |
| Detection range max. | 30 ... 1200 mm |
| Detection range min. | 20 ... 200 mm |
| Diagnostic Coverage (DC) | 0 % |
| Diameter of the light spot | approx. 25 mm at a distance of 1200 mm |
| Function indicator | LED yellow: switching state |
| Housing | Plastic ABS |
| Housing Plastic ABS Optical face plastic | Housing | Plastic ABS | Optical face | plastic |
| Light source | LED 660 nm |
| Light type | modulated visible red light |
| Mass | 90 g |
| Mission Time (T M ) | 20 a |
| MTTF d | 720 a |
| Opening angle | Emitter: 1.2 ° , Receiver: 2 ° |
| Optical face | plastic |
| Product standard | EN 60947-5-2 |
| Protection class | II, rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1 |
| Response time | 4 ms |
| Signal output | 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected |
| Switching type | light-on |
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| Width | 25.8 mm |
Documents
No documents are linked to this part yet.