Fair-Rite Products Corp.United States

Part Number: 3561000521 61 PLATE – Digits 1 & 2 = Product Class – Digits 3 & 4 = Material Grade The Plate Design offers a much needed geometry to be used with the EM Field Applications, i.e. Wireless Power Transfer (WPT), Field focusing, and circuit protection from nearby fields. Plates can be supplied in 31, 43, 61, 75, and 95 material. The A + B dimension can be modified to suit specific applications. (g) + Test frequency Ferrite plates are controlled for Inductance up to 20 Amps. Inductance values are specified at 85 kHz. Saturation Bias is measured up to 20 amps at 85 kHz with 105 turns. CSV Download A high frequency NiZn ferrite developed for a range of inductive applications up to 25 MHz. This material is also used in EMI applications for suppression of noise frequencies above 200 MHz. Excellent stability characteristics. EMI Suppression Beads Beads On Leads SM beads Wound Beads Multi-Aperture Cores Round Cable Snap-Its Toroids Rods Antenna/RFID Rods Round EMI Suppression Cores **** Characteristic curves are measured on standard Toroids (18/10/6 mm) at 25°C and 10 kHz unless otherwise indicated. Impedance characteristics are measured on standard shield beads (3.5/1.3/6.0 mm) unless otherwise indicated.