All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| Current loading capacity | According to DIN VDE 0298 Part 4, Table 6, Column 4 |
| Nominal voltage | U N | 30.5 V |
| Environment and package | |
| Conductor temperature | Operating mode: 90 °C (363 K) Short-circuit: 120 °C (393 K) |
| Other | |
| Acceleration | max. 4 m/s 2 |
| Bending radius | min. 50 mm min. permissible bending radii according to DIN VDE 0298 Part 3, Table 2 Bending stress only permissible on the wide side of the cable |
| Cable | UL-Style 2103 + CSA AWM II A/B |
| Cable, fixed installation | -40 ... 105 °C (-40 ... 221 °F) |
| Cable, fixed installation -40 ... 105 °C (-40 ... 221 °F) Cable, flexing -30 ... 105 °C (-22 ... 221 °F) | Cable, fixed installation | -40 ... 105 °C (-40 ... 221 °F) | Cable, flexing | -30 ... 105 °C (-22 ... 221 °F) |
| Cable Flame-retardant as per IEC 60332-1-2 and UL 1581, Sec. 1061 | Cable | Flame-retardant as per IEC 60332-1-2 and UL 1581, Sec. 1061 |
| Cable, flexing | -30 ... 105 °C (-22 ... 221 °F) |
| Cable length | 100 m |
| Core cross section | Copper tin-plated, extra-fine wire, class 6 in accordance with DIN VDE 0295 cross-section 1.5 mm 2 |
| Core insulation | Thermoplastic Elastomer (TPE) |
| Core insulation Thermoplastic Elastomer (TPE) | Core insulation | Thermoplastic Elastomer (TPE) |
| Cores color | Core 1: brown Core 2: blue |
| Drag chain cycles | min. 10000000 |
| Material | Thermoplastic Elastomer (TPE) Rubber compound EM3, based on DIN VDE 0207 Part 21 |
| Motion velocity | max. 4 m/s |
| Note | The cable is intended for use as a bus power line in inside areas. Only cable with a black sheathing is suitable for outside use. |
| Number of cores | 2 |
| Sheath color | yellow (similar to RAL 1012) |
| Sheath color yellow (similar to RAL 1012) Number of cores 2 Cores color Core 1: brown Core 2: blue | Sheath color | yellow (similar to RAL 1012) | Number of cores | 2 | Cores color | Core 1: brown Core 2: blue |
| Tension loading | max. 50 N/mm 2 on laying acc. to DIN VDE 0298 Part 3 |
| Torsional stress | ± 180 °/0.5 m |
| Torsion cycles | min. 10 mio |
| Traverse distance | 10 m |
| UL File Number | E310133 |
Documents
No documents are linked to this part yet.