All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| Output current | max. 4 A |
| Output voltage | U i ≥ rated voltage U r = U i - 0.6 V |
| Power dissipation | ≤ 2.4 W |
| Rated voltage | U r | 20 ... 30 V DC The maximum rated operating voltage of the devices plugged onto the Power Rail must not be exceeded. |
| AC and DC characteristics | |
| Energized/De-energized delay | approx. 20 ms / approx. 20 ms |
| Environment and package | |
| Ambient temperature | -40 ... 60 °C (-40 ... 140 °F) extended ambient temperature range up to 70 °C (158 °F), refer to manual for necessary mounting conditions |
| Dimensions | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2 |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Other | |
| Certificate | UL 22 ATEX 2853 X |
| Configuration | via DIP switches |
| Connection | terminals 11+, 12- terminals 8+, 9- |
| Contact loading | 30 V AC/ 2 A / cos φ ≥ 0.7 ; 40 V DC/ 2 A |
| Control drawing | 116-0160 |
| Control drawing 116-0160 | Control drawing | 116-0160 |
| Control elements | DIP switch |
| CSA approval | CoC 1051840 |
| Degree of protection | IEC 60529:2001 |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Directive 2014/30/EU EN 61326-1:2013 (industrial locations) | Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Directive 2014/34/EU | EN IEC 60079-0:2018+AC:2020 , EN IEC 60079-7:2015+A1:2018 , EN IEC 60079-15:2019 |
| Directive 2014/34/EU EN IEC 60079-0:2018+AC:2020 , EN IEC 60079-7:2015+A1:2018 , EN IEC 60079-15:2019 | Directive 2014/34/EU | EN IEC 60079-0:2018+AC:2020 , EN IEC 60079-7:2015+A1:2018 , EN IEC 60079-15:2019 |
| Display elements | LEDs |
| Electromagnetic compatibility | NE 21:2017 |
| Fault signal | relay output: NO contact |
| FM approval | FM 22 US 0031 X |
| Fusing | 5 AT/250 V AC recommended maximum utilization of the fuse: 80 % |
| IECEx certificate | IECEx UL 16.0051X |
| IECEx certificate IECEx UL 16.0051X IECEx marking Ex ec nC IIC T4 Gc | IECEx certificate | IECEx UL 16.0051X | IECEx marking | Ex ec nC IIC T4 Gc |
| IECEx marking | Ex ec nC IIC T4 Gc |
| Labeling | space for labeling at the front |
| Marking | II 3G Ex ec nC IIC T4 Gc |
| Marking II 3G Ex ec nC IIC T4 Gc | Marking | II 3G Ex ec nC IIC T4 Gc |
| Mass | approx. 100 g |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| UL approval | E106378 |
Documents
No documents are linked to this part yet.