30150

Active

Inductive sensor

All alternatives

Technical parameters

Power
No-load supply current	I 0 \| ≤ 15 mA
Off-state current	I r \| 0 ... 0.01 mA typ. 0.1 µA at 25 °C
Operating current	I L \| 0 ... 250 mA
Operating voltage	U B \| 10 ... 30 V DC
Rated impulse withstand voltage	U imp \| 800 V
Rated insulation voltage	U i \| 60 V
Rated insulation voltage U i 60 V Rated impulse withstand voltage U imp 800 V	Rated insulation voltage \| U i \| 60 V \| Rated impulse withstand voltage \| U imp \| 800 V
Voltage drop	U d \| ≤ 2.5 V
AC and DC characteristics
Switching frequency	f \| 0 ... 1400 Hz
Environment and package
Ambient temperature	-25 ... 70 °C (-13 ... 158 °F)
Height	40 mm
Height 40 mm Width 12 mm Length 26 mm	Height \| 40 mm \| Width \| 12 mm \| Length \| 26 mm
Other
Assured operating distance	s a \| 0 ... 6.48 mm
Bending radius	> 10 x cable diameter
Cable diameter	5.2 mm ± 0.2 mm
CCC approval	CCC approval / marking not required for products rated ≤36 V
Color	grey
Connection type	cable
Core cross section	0.5 mm 2
Degree of protection	IP67
Diagnostic Coverage (DC)	0 %
Housing material	PA
Hysteresis	H \| typ. 5%
Installation	non-flush
Length	L \| 2 m
Material	PVC
Mission Time (T M )	20 a
MTTF d	1640 a
Number of cores	4
Output polarity	DC
Output type	PNP
Protection class	II
Rated operating distance	s n \| 8 mm
Reduction factor r 304	0.7
Reduction factor r Al	0.45
Reduction factor r Brass	0.55
Reduction factor r Cu	0.45
Reverse polarity protection	reverse polarity protected
Sensing face	PA
Short-circuit protection	pulsing
Standards	EN IEC 60947-5-2
Standards EN IEC 60947-5-2	Standards \| EN IEC 60947-5-2
Switching function	complementary
Switching state indicator	LED, yellow
Tightening torque, fastening screws	Threading M3 ≤ 1.1 Nm
UL approval	cULus Listed Load Type: Resistive Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 250 mA
Width	12 mm
Wire end ferrules	yes

Documents

No documents are linked to this part yet.