3014

Active

Inductive sensor

All alternatives

Technical parameters

Power
Lowest operating current	I m \| 2 mA
Off-state current	I r \| 0 ... 0.5 mA typ.
Operating current	I L \| 2 ... 100 mA
Operating voltage	U B \| 5 ... 60 V
Voltage drop	U d \| ≤ 5 V
AC and DC characteristics
Switching frequency	f \| 0 ... 1000 Hz
Time delay before availability	t v \| ≤
Environment and package
Ambient temperature	-40 ... 70 °C (-40 ... 158 °F)
Other
Actual operating distance	s r \| 1.8 ... 2.2 mm typ.
Assured operating distance	s a \| 0 ... 1.62 mm ( -25 ... 70 °C (-13 ... 158 °F) ) 0 ... 1.52 mm ( -40 ... -25 °C (-40 ... -13 °F) )
CCC approval	Certified by China Compulsory Certification (CCC)
Connection type	Connector plug
Degree of protection	IP67
Diagnostic Coverage (DC)	0 %
Diameter	12 mm
Housing material	brass, nickel-plated
Hysteresis	H \| 1 ... 10 % typ. 5 %
Installation	flush
Length	40 mm
Length 40 mm Diameter 12 mm	Length \| 40 mm \| Diameter \| 12 mm
Mass	28 g
Mission Time (T M )	20 a
MTTF d	2250 a
Number of pins	3
Output polarity	DC
Output type	Two-wire
Rated operating distance	s n \| 2 mm
Reduction factor r 304	0.67
Reduction factor r Al	0.18
Reduction factor r Cu	0.12
Reverse polarity protection	reverse polarity tolerant
Sensing face	PBT
Short-circuit protection	pulsing
Standards	EN IEC 60947-5-2
Standards EN IEC 60947-5-2	Standards \| EN IEC 60947-5-2
Switching function	Normally open (NO)
Switching state indicator	Multihole-LED, yellow
Threading	M12 x 1
Threading M12 x 1 Number of pins 3	Threading \| M12 x 1 \| Number of pins \| 3
UL approval	cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 60 V DC Output Switching Current: 100 mA

Documents

No documents are linked to this part yet.