27209

Active

Background suppression sensor

All alternatives

Technical parameters

Power
No-load supply current	I 0 \| 30 mA
Operating voltage	U B \| 24 V DC ± 20 %
Switching current	max. 200 mA
Switching voltage	max. 30 V DC
AC and DC characteristics
Ripple	10 %
Switching frequency	f \| 35 Hz
Environment and package
Ambient temperature	-20 ... 60 °C (-4 ... 140 °F)
Storage temperature	-20 ... 75 °C (-4 ... 167 °F)
Other
Ambient light limit	30000 Lux
Background suppression	starts from 180 mm
Black-white difference (6 %/90 %)	< 10 mm
CCC approval	CCC approval / marking not required for products rated ≤36 V
Connection	Plastic connector M12 x 1, 4-pin
Degree of protection	IP67
Detection range	20 ... 150 mm
Detection range max.	0 ... 170 mm
Detection range min.	0 ... 145 mm
Diameter	30 mm
Diameter of the light spot	4 mm at a distance of 150 mm
Function indicator	LED yellow, lights up if receiver is not lit
Housing	black ABS , Front cover green (for the differentiation of the sensors in the application)
Housing black ABS , Front cover green (for the differentiation of the sensors in the application) Optical face plastic lenses	Housing \| black ABS , Front cover green (for the differentiation of the sensors in the application) \| Optical face \| plastic lenses
Length	89 mm
Length 89 mm Diameter 30 mm	Length \| 89 mm \| Diameter \| 30 mm
Light source	IRED
Light type	modulated infrared light
Mass	approx. 70 g
Opening angle	± 1 °
Optical face	plastic lenses
Product standard	EN 60947-5-2
Response time	10 ms
Signal output	1 PNP, short-circuit protected, reverse polarity protected, open collector
Switching type	dark-on
UL approval	cULus Listed, Class 2 Power Source, Type 1 enclosure

Documents

No documents are linked to this part yet.