25063

Active

Inductive sensor

All alternatives

Technical parameters

Power
Off-state current	I r \| 0 ... 0.5 mA
Operating current	I L \| 2 ... 100 mA
Operating voltage	U B \| 3.8 ... 30 V DC
Voltage drop	U d \| ≤ 3.8 V
Voltage drop I L = 100 mA, switching element on	U d \| ... 3.8 V
Voltage drop I L = 100 mA, switching element on U d ... 3.8 V	Voltage drop I L = 100 mA, switching element on \| U d \| ... 3.8 V
AC and DC characteristics
Switching frequency	f \| 0 ... 30 Hz
Environment and package
Ambient temperature	-25 ... 70 °C (-13 ... 158 °F)
Height	40 mm
Height 40 mm Width 40 mm Length 67 mm	Height \| 40 mm \| Width \| 40 mm \| Length \| 67 mm
Storage temperature	-25 ... 85 °C (-13 ... 185 °F)
Other
Actual operating distance	s r \| 36 ... 44 mm
Assured operating distance	s a \| 0 ... 32.4 mm
CCC approval	CCC approval / marking not required for products rated ≤36 V
Connection type	Connector plug
Degree of protection	IP69K
Housing material	PA
Hysteresis	H \| typ. 5%
Installation	non-flush
Length	67 mm
Mass	153 g
Number of pins	4
Output polarity	DC
Output type	Two-wire
Rated operating distance	s n \| 40 mm
Reduction factor r 304	0.75
Reduction factor r Al	0.33
Reduction factor r Brass	0.41
Reduction factor r Cu	0.31
Reverse polarity protection	reverse polarity protected
Sensing face	PA
Short-circuit protection	pulsing
Standards	EN IEC 60947-5-2
Standards EN IEC 60947-5-2	Standards \| EN IEC 60947-5-2
Switching function	Normally closed (NC)
Switching state indicator	LED, yellow
Threading	M12 x 1
Threading M12 x 1 Number of pins 4	Threading \| M12 x 1 \| Number of pins \| 4
UL approval	cULus Listed Load Type: Resistive Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 100 mA
Width	40 mm

Documents

No documents are linked to this part yet.