All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| No-load supply current | I 0 | ≤ 50 mA |
| Operating voltage | U B | 10 ... 30 V DC , ripple 10 % SS |
| Rated operating current | I e | 200 mA , short-circuit/overload protected |
| Voltage drop | U d | ≤ 2.5 V |
| AC and DC characteristics | |
| Repeat accuracy | ≤ 0.5 % of switching point |
| Response delay | approx. 650 ms |
| Switching frequency | f | ≤ 0.8 Hz |
| Transducer frequency | approx. 65 kHz |
| Environment and package | |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Temperature influence | < 2 % of far switch point |
| Other | |
| Adjustment range | 400 ... 6000 mm |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Common mode operation | max. 7 Hz |
| Common mode operation max. 7 Hz Multiplex operation ≤ 7 Hz / n , n = number of sensors , n ≤ 5 | Common mode operation | max. 7 Hz | Multiplex operation | ≤ 7 Hz / n , n = number of sensors , n ≤ 5 |
| Connection type | Connector plug M12 x 1 , 5-pin |
| Dead band | 0 ... 350 mm |
| Degree of protection | IP65 |
| Diameter | 73 mm |
| Housing | nickel plated brass; plastic components: PBT |
| Housing nickel plated brass; plastic components: PBT Transducer epoxy resin/hollow glass sphere mixture; polyurethane foam | Housing | nickel plated brass; plastic components: PBT | Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam |
| Input type | 1 program input, operating range 1: -U B ... +1 V, operating range 2: +4 V ... +U B input impedance: > 4.7 kΩ; program pulse: ≥ 1 s |
| LED green | solid: Power-on flashing: program function object detected |
| LED red | normal operation: "fault" program function: no object detected |
| LED yellow | solid: switching state switch output flashing: program function |
| Length | 112 mm |
| Length 112 mm Diameter 73 mm | Length | 112 mm | Diameter | 73 mm |
| Mass | 250 g |
| Multiplex operation | ≤ 7 Hz / n , n = number of sensors , n ≤ 5 |
| Output | Switch point A1: 880 mm Switch point A2: 6300 mm output function: Window mode output behavior: NO contact |
| Output type | 1 switch output PNP , Normally open/closed , programmable |
| Range hysteresis | H | 1 % of the set operating distance |
| Sensing range | 350 ... 6000 mm |
| Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 |
| Standards EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 | Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 |
| Standard target plate | 100 mm x 100 mm |
| Synchronization | bi-directional 0 level -U B ...+1 V 1 level: +4 V...+U B input impedance: > 12 KOhm synchronization pulse: ≥ 100 µs, synchronization interpulse period: ≥ 2 ms |
| Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam |
| UL approval | cULus Listed, General Purpose |
Documents
No documents are linked to this part yet.