All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| Current | I o | 4.2 mA |
| Input/power supply | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Maximum safe voltage | U m | 250 V (Attention! The rated voltage is lower.) |
| Maximum safe voltage U m 250 V (Attention! The rated voltage is lower.) | Maximum safe voltage | U m | 250 V (Attention! The rated voltage is lower.) |
| Output/power supply | functional insulation, rated insulation voltage 50 V AC |
| Power | P o | 19 mW |
| Rated current | I r | < 20 mA |
| Rated voltage | U r | 20 ... 35 V DC |
| Voltage | 0 ... 12 V |
| AC and DC characteristics | |
| Cut-off frequency | 1.2 kHz (-3 dB) |
| Offset voltage/current | < 2 mV / < 7 nA |
| Ripple | within the supply tolerance |
| Rise time | ≤ 0.4 ms |
| Environment and package | |
| After calibration ± 5 mV at 20 °C (68 °F) Influence of ambient temperature ≤ 0.005 % of range per K | After calibration | ± 5 mV at 20 °C (68 °F) | Influence of ambient temperature | ≤ 0.005 % of range per K |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Dimensions | 20 x 107 x 115 mm (0.8 x 4.2 x 4.5 inch) (W x H x D) , housing type B1 |
| Height | 107 mm |
| Height 107 mm Width 20 mm Depth 115 mm | Height | 107 mm | Width | 20 mm | Depth | 115 mm |
| Influence of ambient temperature | ≤ 0.005 % of range per K |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Other | |
| After calibration | ± 5 mV at 20 °C (68 °F) |
| Certificate | BASEEFA 10 ATEX 0079X |
| Connection | Power Rail or terminals 11+, 12- |
| Connection side | field side |
| Control drawing | 116-0129 |
| Control drawing 116-0129 | Control drawing | 116-0129 |
| Control drawing 116-0132 | Control drawing | 116-0132 |
| Control drawing 116-0173 (cULus) | Control drawing | 116-0173 (cULus) |
| Degree of protection | IEC 60529 |
| Depth | 115 mm |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Directive 2014/30/EU EN 61326-1:2013 (industrial locations) | Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-7:2015+A1:2018 |
| Directive 2014/34/EU EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-7:2015+A1:2018 | Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-7:2015+A1:2018 |
| Display elements | LED |
| Electromagnetic compatibility | NE 21 |
| EU-type examination certificate | BAS 01 ATEX 7262 |
| IECEx certificate | IECEx BAS 10.0040X |
| IECEx certificate IECEx BAS 10.0040X IECEx marking Ex ec IIC T4 Gc | IECEx certificate | IECEx BAS 10.0040X | IECEx marking | Ex ec IIC T4 Gc |
| IECEx marking | Ex ec IIC T4 Gc |
| Input/Output | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Input resistance | min. 10 MΩ |
| Labeling | space for labeling at the front |
| Marking | II (1)GD, I (M1) [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I (-20 °C ≤ T amb ≤ 60 °C) , [circuit(s) in zone 0/1/2] |
| Marking II 3G Ex ec IIC T4 Gc [device in zone 2] | Marking | II 3G Ex ec IIC T4 Gc [device in zone 2] |
| Mass | approx. 100 g |
| Output resistance | max. 20 Ω |
| Signal type | Analog input |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Transmission range | 0 ... 12 V |
| Width | 20 mm |
Documents
No documents are linked to this part yet.