1763

Active

Print mark color sensor, 9.5 mm detection range, RGB light with rectangular light spot, external Teach-In, Teach-In button, timer function, NPN output, PNP output, M12 plug

See alternatives Ask AI FAE

All alternatives

View full report

Technical parameters

Power
No-load supply current	I 0 \| ≤ 55 mA
Operating voltage	U B \| 10 ... 30 V DC
Switching current	max. 200 mA
Switching voltage	PNP: ≥ (+U B -2.5 V) , NPN: ≤ 1.5 V
AC and DC characteristics
Ripple	10 %
Switching frequency	f \| 1.65 kHz
Environment and package
Ambient temperature	-20 ... 60 °C (-4 ... 140 °F)
Height	85.5 mm
Height 85.5 mm Width 33 mm Depth 60.8 mm	Height \| 85.5 mm \| Width \| 33 mm \| Depth \| 60.8 mm
Storage temperature	-20 ... 75 °C (-4 ... 167 °F)
Other
Angle deviation	max. ± 3°
Approvals	CE
CCC approval	CCC approval / marking not required for products rated ≤36 V
Connection	5-pin, M12 x 1 connector
Control elements	Teach-In key
Degree of protection	IP67
Depth	60.8 mm
Diagnostic Coverage (DC)	0 %
Function indicator	LED yellow, lights up if print mark is detected flashes, if no safe operation is possible
Function input	Teach-In input
Housing	PC (glass-fiber-reinforced Makrolon)
Housing PC (glass-fiber-reinforced Makrolon) Optical face glass	Housing \| PC (glass-fiber-reinforced Makrolon) \| Optical face \| glass
Light source	3 LEDs (R,G,B)
Light spot representation	rectangular 1 mm x 4 mm
Light type	Visible green/red/blue, modulated light
Mass	200 g
Mission Time (T M )	20 a
MTTF d	650 a
Optical face	glass
Product standard	EN 60947-5-2
Response time	300 µs
Sensor range	9.5 mm ± 2 mm
Signal output	1 PNP and 1 NPN short-circuit protected, open collector, synchronized-switching
Switching type	PNP switches according to +U B , NPN according to 0 V for detected mark
Timer function	Impulsed time element off-delay 20 ms
Width	33 mm

Documents

No documents are linked to this part yet.