All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| No-load supply current | I 0 | ≤ 20 mA |
| Operating current | I L | 0 ... 200 mA |
| Operating voltage | U B | 10 ... 30 V |
| Voltage drop | U d | ≤ 3 V |
| AC and DC characteristics | |
| Switching frequency | f | 0 ... 100 Hz |
| Environment and package | |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Other | |
| Assured operating distance | s a | 0 ... 20.25 mm |
| Bending radius | > 10 x cable diameter |
| Cable diameter | 6.4 mm ± 0.2 mm |
| Color | grey |
| Connection type | cable |
| Core cross section | 0.75 mm 2 |
| Degree of protection | IP67 |
| Diagnostic Coverage (DC) | 0 % |
| Diameter | 50 mm |
| Housing material | PBT |
| Installation | non-flush |
| Length | L | 2 m |
| Length 40 mm Diameter 50 mm | Length | 40 mm | Diameter | 50 mm |
| Mass | 270 g |
| Material | PVC |
| Mission Time (T M ) | 20 a |
| MTTF d | 1326 a |
| Number of cores | 3 |
| Output polarity | DC |
| Output type | PNP |
| Rated operating distance | s n | 25 mm |
| Reduction factor r 304 | 0.85 |
| Reduction factor r Al | 0.4 |
| Reduction factor r Cu | 0.3 |
| Reverse polarity protection | reverse polarity protected |
| Sensing face | PBT |
| Short-circuit protection | pulsing |
| Standards | EN IEC 60947-5-2 |
| Standards EN IEC 60947-5-2 | Standards | EN IEC 60947-5-2 |
| Switching function | Normally open (NO) |
| Tightening torque, fastening screws | ≤ 1.8 Nm |
| UL approval | cULus Listed Load Type: Resistive Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 200 mA |
| Wire end ferrules | yes |
Documents
No documents are linked to this part yet.