14990

Active

Inductive sensor

All alternatives

Technical parameters

Power
Off-state current	I r \| typ. 0.8 mA
Operating current	I L \| 2 ... 100 mA
Operating voltage	U B \| 3.5 ... 30 V
Voltage drop	U d \| ≤ 3.5 V
AC and DC characteristics
Switching frequency	f \| 500 Hz
Environment and package
Ambient temperature	-25 ... 70 °C (-13 ... 158 °F)
Storage temperature	-25 ... 85 °C (-13 ... 185 °F)
Temperature drift	± 15%
Other
Assured operating distance	s a \| 0 ... 12 mm
CCC approval	CCC approval / marking not required for products rated ≤36 V
Connection type	Connector plug
Degree of protection	IP67
Diagnostic Coverage (DC)	0 %
Diameter	30 mm
Housing material	brass, nickel-plated
Hysteresis	H \| typ. 5%
Installation	flush
Length	48 mm
Length 48 mm Diameter 30 mm	Length \| 48 mm \| Diameter \| 30 mm
Mass	137 g
Mission Time (T M )	20 a
MTTF d	1390 a
Number of pins	4
Output polarity	DC
Output type	Two-wire
Rated operating distance	s n \| 15 mm
Reduction factor r 304	0.7
Reduction factor r Al	0.4
Reduction factor r Brass	0.5
Reduction factor r Cu	0.4
Reverse polarity protection	reverse polarity-conductive
Sensing face	PBT
Short-circuit protection	pulsing
Stability alarm indicator	LED, red
Stability control-switch point	0,8 s r ... 0,9 s r
Standards	EN IEC 61000-6-2:2019-02 EN IEC 61000-6-3:2021-03
Standards EN IEC 61000-6-2:2019-02 EN IEC 61000-6-3:2021-03	Standards \| EN IEC 61000-6-2:2019-02 EN IEC 61000-6-3:2021-03
Switching function	Normally open (NO)
Switching state indicator	LED, yellow
Threading	M12 x 1
Threading M12 x 1 Number of pins 4	Threading \| M12 x 1 \| Number of pins \| 4
UL approval	cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 100 mA

Documents

No documents are linked to this part yet.