All alternatives

View full report

Technical parameters

Power
Power dissipation3 W
PROFIBUS DP/Supplyfunctional insulation acc. to IEC 62103, rated insulation voltage 50 V eff
Rated currentI r | 150 ... 95 mA
Rated voltageU r | 19.2 ... 30 V DC
Environment and package
Ambient temperature-40 ... 60 °C (-40 ... 140 °F)
Design / MountingMotherboard based
Height106 mm
Height 106 mm Width 40 mm Depth 128 mmHeight | 106 mm | Width | 40 mm | Depth | 128 mm
Mountingmotherboard mounting
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Other
All circuits/FEfunctional insulation acc. to IEC 62103, rated insulation voltage 50 V eff
CertificateTÜV 04 ATEX 2500 X
CH/CHfunctional insulation acc. to IEC 62103, rated insulation voltage 50 V eff
CH/PROFIBUS DPfunctional insulation acc. to IEC 62103, rated insulation voltage 50 V eff
Connection9-pin Sub-D socket
Connection 9-pin Sub-D socket Protocol PROFIBUS DP V1Connection | 9-pin Sub-D socket | Protocol | PROFIBUS DP V1
Corrosion resistanceacc. to ISA-S71.04-1985, severity level G3
Degree of protectionIEC 60529
Depth128 mm
Directive 2014/30/EUEN 61326-1:2013
Directive 2014/30/EU EN 61326-1:2013Directive 2014/30/EU | EN 61326-1:2013
Directive 2014/34/EUEN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010
Directive 2014/34/EU EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010Directive 2014/34/EU | EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010
Directive 73/23/EECEN 50178 (identical to EN 62103)
Directive 73/23/EEC EN 50178 (identical to EN 62103)Directive 73/23/EEC | EN 50178 (identical to EN 62103)
Electromagnetic compatibilityNE 21:2017 for simplex operating mode only
Fieldbus standardIEC 61158-2
Galvanic isolationIEC 62103
Housing materialPolycarbonate
IECEx certificateIECEx TUN 13.0038X
IECEx certificate IECEx TUN 13.0038X IECEx marking Ex nA IIC T4 GcIECEx certificate | IECEx TUN 13.0038X | IECEx marking | Ex nA IIC T4 Gc
IECEx markingEx nA IIC T4 Gc
Installation in hazardous areaZone 2 / Div. 2
LED DP/ERRred 2 Hz flashing: DP error ; red: Hardware error
LED PWRgreen: Power on
LED Red.yellow: redundant operation primary device ; yellow 2 Hz flashing: synchronization or redundancy not available
LED Seg 1...4red 2 Hz flashing: PA error, red and LED DP/ERR red: MAU error
MarkingII 3 G Ex nA IIC T4 Gc
Marking II 3 G Ex nA IIC T4 GcMarking | II 3 G Ex nA IIC T4 Gc
Mass250 g
Number of segments4
Pollution degreemax. 2, according to IEC 60664
ProtocolPROFIBUS DP V1
Relative humidity< 95 % non-condensing
Shock resistanceEN 60068-2-27
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Vibration resistanceEN 60068-2-6
Width40 mm

Documents

No documents are linked to this part yet.