All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| Input/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V eff |
| Open circuit voltage/short-circuit current | approx. 10 V AC (approx. 1 Hz) / approx. 5 mA |
| Output/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V eff |
| Power consumption | approx. 0.8 W |
| Rated voltage | U r | 207 ... 253 V AC, 45 ... 65 Hz |
| AC and DC characteristics | |
| Energized/De-energized delay | approx. 1 s / approx. 1 s |
| Environment and package | |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Dimensions | 20 x 107 x 115 mm (0.8 x 4.2 x 4.5 inch) (W x H x D) , housing type B1 |
| Height | 107 mm |
| Height 107 mm Width 20 mm Depth 115 mm | Height | 107 mm | Width | 20 mm | Depth | 115 mm |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Other | |
| Configuration | via DIP switches : switch S1 Position I open circuit current: In the open circuit current principle, the relay becomes active when the limit is reached. Position II closed circuit current: In closed circuit current principle, the relay is activated when power is applied. The relay is deactivated when the limit is reached. via potentiometer |
| Connection | terminals 11 (L1), 12 (N) |
| Connection side | field side |
| Contact loading | 253 V AC/2 A/cos φ > 0.7; 40 V DC/2 A resistive load |
| Control elements | DIP switch potentiometer |
| Control input | min./max. control system: terminals 1, 2, 3 on/off control system: terminals 1, 3 |
| Degree of protection | IEC 60529:2001 |
| Depth | 115 mm |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Directive 2014/30/EU EN 61326-1:2013 (industrial locations) | Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Directive 2014/35/EU | EN 61010-1:2010 |
| Directive 2014/35/EU EN 61010-1:2010 | Directive 2014/35/EU | EN 61010-1:2010 |
| Display elements | LEDs |
| Electromagnetic compatibility | NE 21:2006 |
| Galvanic isolation | EN 50178:1997 |
| Input/Output | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V eff |
| Insulation coordination | EN 50178:1997 |
| Labeling | space for labeling at the front |
| Mass | approx. 110 g |
| Output | 1 changeover contact |
| Response sensitivity | 5 ... 150 kΩ , adjustable via potentiometer (20 turns) |
| Signal type | Digital Input |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Width | 20 mm |
Documents
No documents are linked to this part yet.