All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| No-load supply current | I 0 | < 35 mA at 24 V Operating voltage |
| Operating voltage | U B | 10 ... 30 V DC |
| Switching current | max. 100 mA , resistive load |
| Switching voltage | max. 30 V DC |
| Voltage drop | U d | ≤ 1.5 V DC |
| AC and DC characteristics | |
| Ripple | max. 10 % |
| Switching frequency | f | 1000 Hz |
| Environment and package | |
| Ambient temperature | -30 ... 60 °C (-22 ... 140 °F) |
| Height | 61.9 mm |
| Height 61.9 mm Width 20 mm Depth 41.7 mm | Height | 61.9 mm | Width | 20 mm | Depth | 41.7 mm |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Other | |
| Adjustment range | 200 ... 1250 mm |
| Ambient light limit | EN 60947-5-2 : 30000 Lux |
| Black-white difference (6 %/90 %) | < 35 % at 1250 mm |
| Cable length | 2 m |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Connection | 2 m fixed cable |
| Control elements | Light-on/dark-on changeover switch |
| Degree of protection | IP67 |
| Depth | 41.7 mm |
| Detection range | 0 ... 1250 mm |
| Detection range max. | 0 ... 1250 mm |
| Detection range min. | 0 ... 200 mm |
| Diagnostic Coverage (DC) | 0 % |
| Diameter of the light spot | approx. 50 mm at a distance of 1250 mm |
| Function indicator | LED yellow: constantly on - object detected constantly off - object not detected Flashing (8 Hz) - fault detected, the outputs maintain the status |
| Housing | PC (Polycarbonate) |
| Housing PC (Polycarbonate) Optical face PMMA | Housing | PC (Polycarbonate) | Optical face | PMMA |
| LED risk group labelling | exempt group |
| Light source | LED |
| Light type | modulated infrared light |
| Mass | approx. 100 g |
| Mission Time (T M ) | 20 a |
| MTTF d | 876 a |
| Opening angle | 3 ° |
| Operation indicator | LED green: on - power on flashing (4 Hz) - short circuit |
| Optical face | PMMA |
| Product standard | EN 60947-5-2 |
| Protection class | III |
| Reference target | standard white, 100 mm x 100 mm |
| Response time | 0.5 ms |
| Signal output | 1 NPN, short-circuit protected, reverse polarity protected |
| Switching type | The switching type of the sensor is adjustable. The default setting is: Q - Pin4: NPN normally open / light-on |
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| Usage category | DC-12 and DC-13 |
| Width | 20 mm |
Documents
No documents are linked to this part yet.