All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| Current I o | 13.1 mA |
| Current range | 0 ... 20 mA or 4 ... 20 mA |
| Influence of supply voltage | < 0.01 % of span |
| Input/Other circuits safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V | Input/Other circuits | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Maximum safe voltage | U m | 250 V (Attention! This is not the rated voltage.) |
| Maximum safe voltage U m 250 V (Attention! The rated voltage is lower.), RS 232 | Maximum safe voltage | U m | 250 V (Attention! The rated voltage is lower.), RS 232 |
| Maximum safe voltage U m 250 V (Attention! This is not the rated voltage.) | Maximum safe voltage | U m | 250 V (Attention! This is not the rated voltage.) |
| Measuring current | approx. 200 µA with RTD |
| Output/supply, programming input | functional insulation, rated insulation voltage 50 V AC There is no electrical isolation between the programming input and the supply. The programming cable provides galvanic isolation so that ground loops are avoided. |
| Power consumption | max. 0.98 W |
| Power dissipation | ≤ 0.98 W |
| Power P o | 30 mW |
| Rated voltage | U r | 19 ... 30 V DC |
| Voltage | selectable within the range -100 ... 100 mV |
| Voltage U o | 9 V |
| Voltage U o 9 V Current I o 13.1 mA Power P o 30 mW | Voltage U o | 9 V | Current I o | 13.1 mA | Power P o | 30 mW |
| AC and DC characteristics | |
| Protection against electrical shock | UL 61010-1:2004 |
| Ripple | within the supply tolerance |
| Environment and package | |
| Ambient temperature | -20 ... 70 °C (-4 ... 158 °F) |
| Dimensions | 12.5 x 119 x 114 mm (0.5 x 4.7 x 4.5 inch) (W x H x D) , housing type A2 |
| Influence of ambient temperature | Pt100: ± (0.0015 % of measurement value in K + 0.006 % of span)/K ΔT amb *) thermocouple: ± (0.02 K + 0.005 % of measurement value in °C + 0.006 % of span)/K ΔT amb *) ), influence of cold junction compensation (CJC) included mV: ± (0.01 % of measurement value + 0.006 % of span)/K ΔT amb *) potentiometer: ± 0.006 % of span/K ΔT amb *) *) ΔT amb = ambient temperature change referenced to 23 °C (296 K) |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Other | |
| After calibration | Pt100: ± (0.06 % of measurement value in K + 0.1 % of span + 0.1 K (4-wire connection)) thermocouple: ± (0.05 % of measurement value in °C + 0.1 % of span + 1.5 K (1.7 K for types R and S)) , includes ± 1.3 K fault of the cold junction compensation (CJC) mV: ± (50 µV + 0.1 % of span) potentiometer: ± (0.05 % of full scale + 0.1 % of span, (excludes faults due to lead resistance)) |
| Certificate | BASEEFA 13 ATEX 0103 X |
| Cold junction compensation | external and internal |
| Cold junction compensation external and internal Measurement loop monitoring sensor breakage | Cold junction compensation | external and internal | Measurement loop monitoring | sensor breakage |
| Configuration | via PACTware |
| Connection | terminals 9+, 10- or power feed module/Power Rail |
| Connection side | field side |
| Control drawing | 116-0379 (cULus) |
| Control drawing 116-0379 (cULus) | Control drawing | 116-0379 (cULus) |
| Degree of protection | IEC 60529:2001 |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Directive 2014/30/EU EN 61326-1:2013 (industrial locations) | Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Directive 2014/34/EU | EN IEC 60079-0:2018+AC:2020 , EN IEC 60079-11:2024 , EN 60079-15:2010 |
| Directive 2014/34/EU EN IEC 60079-0:2018+AC:2020 , EN IEC 60079-11:2024 , EN 60079-15:2010 | Directive 2014/34/EU | EN IEC 60079-0:2018+AC:2020 , EN IEC 60079-11:2024 , EN 60079-15:2010 |
| Display elements | LEDs |
| Electromagnetic compatibility | NE 21:2012 EN 61326-3-2:2008 |
| EU-type examination certificate | BASEEFA 13 ATEX 0102 X |
| Fault signal | downscale 0 or 2 mA, upscale 21.5 mA (acc. NAMUR NE43) |
| IECEx certificate | IECEx BAS 13.0057X |
| IECEx certificate IECEx BAS 13.0057X IECEx marking [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I | IECEx certificate | IECEx BAS 13.0057X | IECEx marking | [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I |
| IECEx marking | [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I |
| Influence of load | ≤ 0.001 % of output value per 100 Ω |
| Input | [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I |
| Input/Other circuits | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Input resistance | ≥ 1 MΩ (-100 ... 100 mV) |
| Inputs | terminals 1, 2, 3, 4 |
| Labeling | space for labeling at the front |
| Lead resistance | max. 50 Ω per line |
| Marking | II (1)G [Ex ia Ga] IIC , [exsign] II (1)D [Ex ia Da] IIIC , [exsign] I (M1) [Ex ia Ma] I |
| Marking II (1)G [Ex ia Ga] IIC , [exsign] II (1)D [Ex ia Da] IIIC , [exsign] I (M1) [Ex ia Ma] I Input [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I | Marking | II (1)G [Ex ia Ga] IIC , [exsign] II (1)D [Ex ia Da] IIIC , [exsign] I (M1) [Ex ia Ma] I | Input | [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I |
| Marking II 3G Ex nA IIC T4 Gc | Marking | II 3G Ex nA IIC T4 Gc |
| Mass | approx. 100 g |
| Measurement loop monitoring | sensor breakage, sensor short-circuit |
| Output | Analog current output |
| Potentiometer | 0 ... 20 kΩ (2-wire connection), 0.8 ... 20 kΩ (3-wire connection) |
| Programming interface | programming socket |
| Reaction time | worst case value (sensor breakage and/or sensor short circuit detection enabled) mV: 1 s, thermocouples with CJC: 1.1 s, thermocouples with fixed reference temperature: 1.1 s, 3- or 4-wire RTD: 920 ms, 2-wire RTD: 800 ms, Potentiometer: 2.05 s |
| RTD | type Pt10, Pt50, Pt100, Pt500, Pt1000 (EN 60751: 1995) type Pt10GOST, Pt50GOST, Pt100GOST, Pt500GOST, Pt1000GOST (6651-94) type Cu10, Cu50, Cu100 (P50353-92) type Ni100 (DIN 43760) |
| Safety Integrity Level (SIL) | SIL 2 |
| Signal type | Analog input |
| Sink | Voltage across terminals 5 ... 30 V. If the current is supplied from a source > 16.5 V, series resistance of ≥ (V - 16.5)/0.0215 Ω is needed, where V is the source voltage. The maximum value of the resistance is (V - 5)/0.0215 Ω. |
| Source | load 0 ... 550 Ω open-circuit voltage ≤ 18 V |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Thermocouples | type B, E, J, K, N, R, S, T (IEC 584-1: 1995) type L (DIN 43710: 1985) type TXK, TXKH, TXA (P8.585-2001) |
| Types of measuring | 2-, 3-, 4-wire connection |
Documents
No documents are linked to this part yet.