All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| No-load supply current | I 0 | < 30 mA at 24 V Operating voltage |
| Operating voltage | U B | 24 ... 240 V AC/DC |
| Power consumption | P 0 | ≤ 3.5 VA |
| Rated impulse withstand voltage | U imp | 2500 V |
| Rated insulation voltage | U i | 250 V |
| Rated insulation voltage U i 250 V Rated impulse withstand voltage U imp 2500 V | Rated insulation voltage | U i | 250 V | Rated impulse withstand voltage | U imp | 2500 V |
| Switching current | max. 2.5 A , see section characteristic curve |
| Switching power | DC: max. 95 W AC: max. 600 VA |
| Switching voltage | max. 240 V AC/DC |
| AC and DC characteristics | |
| Switching frequency | f | 25 Hz |
| Environment and package | |
| Ambient temperature | -30 ... 60 °C (-22 ... 140 °F) , cable, fixed installation -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains |
| Height | 61.9 mm |
| Height 61.9 mm Width 20 mm Depth 41.7 mm | Height | 61.9 mm | Width | 20 mm | Depth | 41.7 mm |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Other | |
| Ambient light limit | EN 60947-5-2 : 60000 Lux |
| Cable length | 2 m |
| Connection | 2 m fixed cable |
| Control elements | Light-on/dark-on changeover switch |
| Degree of protection | IP67 |
| Depth | 41.7 mm |
| Diagnostic Coverage (DC) | 0 % |
| Diameter of the light spot | approx. 300 mm at a distance of 10 m |
| Effective detection range | 0 ... 10 m |
| Function indicator | Yellow LED: Permanently lit - light path clear Permanently off - object detected Flashing (4 Hz) - insufficient operating reserve Flashing (8 Hz) - fault detected, the outputs maintain the status |
| Fuse | Safety fuse ≤ 2 A (slow-blow) according to IEC 60127-2 Sheet 1 Recommendation: after a short circuit, check that the device is functioning correctly. |
| Housing | PC (Polycarbonate) |
| Housing PC (Polycarbonate) Optical face PMMA | Housing | PC (Polycarbonate) | Optical face | PMMA |
| LED risk group labelling | exempt group |
| Light source | LED |
| Light type | modulated visible red light |
| Mass | approx. 120 g |
| Mission Time (T M ) | 20 a |
| MTTF d | 642 a |
| Opening angle | 2 ° |
| Operation indicator | LED green: power on |
| Optical face | PMMA |
| Polarization filter | yes |
| Pollution degree | 3 |
| Product standard | EN 60947-5-2 , EN 60947-1 |
| Protection class | II |
| Reference target | H85-2 reflector |
| Reflector distance | 0.05 ... 10 m |
| Response time | ≤ 20 ms |
| Signal output | Relay, 1 alternator |
| Switching type | The switching type of the sensor is adjustable. The default setting is: Q - BK: normally-open / dark-on /Q - GY: normally-closed / light-on C - WH: Common |
| Threshold detection range | 12 m |
| UL approval | E87056 , cULus Listed |
| Usage category | DC-12 , DC-13 , AC-12 u. AC-140 |
| Width | 20 mm |
Documents
No documents are linked to this part yet.