Pepperl+Fuchs, Inc.Germany
121614
ActiveEvaluation unit for the ultrasonic sensor system USi-industry with analog and switching outputs (stand-alone device/secondary device)
All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| No-load supply current | I 0 | ≤ 160 mA |
| Off-state current | ≤ 100 µA |
| Operating voltage | U B | 9 ... 30 V DC |
| Power consumption | P 0 | < 2.5 W |
| Switching current | 100 mA |
| Switching voltage | max. U B |
| Voltage drop | ≤ 2.5 V |
| AC and DC characteristics | |
| Repeat accuracy | ± 0.1 % of full-scale value |
| Resolution | 1 mm |
| Response delay | 10 ... 20000 ms factory setting: 150 ms |
| Switching frequency | 0.05 Hz ... 100 Hz |
| Time delay before availability | t v | ≤ 300 ms |
| Transducer frequency | approx. 103 kHz |
| Environment and package | |
| Ambient temperature | -30 ... 70 °C (-22 ... 158 °F) |
| Height | 35 mm |
| Height 35 mm Width 77 mm Length 98 mm | Height | 35 mm | Width | 77 mm | Length | 98 mm |
| Object size | typ. ∅ 10 mm |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Temperature influence | automatic or manual temperature compensation available , without temperature compensation: 0.17 %/K |
| Other | |
| Adjustment range | 150 ... 2500 mm |
| Button | Teach-in |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Connection | for power supply and outputs: connector plug M12, 8-pin, connection line max. 30 m for ultrasonic transducer: for each socket M8, 3-pin for parameterization: socket Mini USB |
| Connection type | Connector plug |
| Dead band | 0 ... 10 mm |
| Degree of protection | IP65 |
| Designation | OUT 1.1 |
| Deviation of the characteristic curve | ± 1 % of the full-scale value |
| Housing | diecast aluminum |
| Housing diecast aluminum | Housing | diecast aluminum |
| Input type | 2 inputs for ultrasonic transducers 1 digital input |
| Interface type | USB 2.0 |
| LED green | supply voltage/device status |
| LED yellow | output states |
| Length | 98 mm |
| Load resistor | current output: ≤ 500 Ω voltage output: ≥ 1000 Ω |
| Mass | 250 g |
| Output type | 1 analog output 4 ... 20 mA or 1 analog output 0 ... 10 V |
| Sensing range | 10 ... 2500 mm factory setting: 2000 mm |
| Sensor cycle time | 10 ... 200 ms factory setting: 50 ms |
| Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 EN 60947-5-7:2003 IEC 60947-5-7:2003 EN 55011:2016-04 |
| Standards EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 EN 60947-5-7:2003 IEC 60947-5-7:2003 EN 55011:2016-04 | Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 EN 60947-5-7:2003 IEC 60947-5-7:2003 EN 55011:2016-04 |
| Target velocity | axial (max.): typ. 2 m/s (up to 2.5 m/s) |
| Type | USi-industry evaluation unit |
| Width | 77 mm |
Documents
No documents are linked to this part yet.