All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| Available voltage | ≥ 15 V at 20 mA , ≥ 18 V at 4 mA on SL2: 5a(+), 5b(-) |
| Current | I o | 100 mA |
| Input/power supply | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Maximum safe voltage | U m | 250 V AC (Attention! U m is no rated voltage.) |
| Maximum safe voltage U m 250 V AC (Attention! U m is no rated voltage.) | Maximum safe voltage | U m | 250 V AC (Attention! U m is no rated voltage.) |
| Output/power supply | basic insulation according to IEC/EN 61010-1, rated insulation voltage 60 V eff |
| Power | P o | 630 mW |
| Power consumption | ≤ 1.1 W |
| Power dissipation | ≤ 800 mW |
| Rated current | I r | ≤ 45 mA at 24 V and 20 mA source mode output |
| Rated voltage | U r | 19 ... 30 V DC bus powered via Termination Board |
| Voltage | U o | 25.2 V |
| Voltage drop | approx. 5 V on SL2: 5a(+), 1b(-) |
| Voltage U o 25.2 V Current I o 100 mA Power P o 630 mW Internal capacitance C i 5.7 nF Internal inductance L i negligible | Voltage | U o | 25.2 V | Current | I o | 100 mA | Power | P o | 630 mW | Internal capacitance | C i | 5.7 nF | Internal inductance | L i | negligible |
| AC and DC characteristics | |
| Frequency range | field side into the control side: bandwidth with 0.5 V pp signal 0 ... 3 kHz (-3 dB) control side into the field side: bandwidth with 0.5 V pp signal 0 ... 3 kHz (-3 dB) |
| Protection against electrical shock | UL 61010-1:2018 |
| Ripple | ≤ 10 % |
| Rise time/fall time | ≤ 10 ms |
| Settling time | ≤ 50 ms |
| Environment and package | |
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Dimensions | 12.5 x 106 x 128 mm (0.5 x 4.2 x 5.1 inch) (W x H x D) |
| Influence of ambient temperature | < 2 µA/K (-20 ... 70 °C (-4 ... 158 °F)); < 4 µA/K (-40 ... -20 °C (-40 ... -4 °F)) (source mode and sink mode 4 ... 20mA) < 0.5 mV/K (-20 ... 70 °C (-4 ... 158 °F)); < 1 mV/K (-40 ... -20 °C (-40 ... -4 °F)) (source mode 1...5 V) |
| Mounting | on termination board |
| Other | |
| Certificate | CESI 19 ATEX 027 X |
| Coding | pin 1 and 3 trimmed For further information see system description. |
| Configuration | via DIP switches |
| Connection | SL1: 1a, 1b(-); 2a, 2b(+) |
| Connection side | field side |
| Control drawing | 116-0470 (cFMus) |
| Control drawing 116-0458 (cULus) | Control drawing | 116-0458 (cULus) |
| Control elements | DIP switch |
| Degree of protection | IEC 60529:2001 |
| Deviation | at 20 °C (68 °F) < 0.1 % of full scale, incl. non-linearity and hysteresis (source mode and sink mode 4 ... 20 mA) ≤ ± 0.2 % incl. non-linearity and hysteresis (source mode 1 ... 5 V) |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Directive 2014/30/EU EN 61326-1:2013 (industrial locations) | Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Directive 2014/34/EU | EN IEC 60079-0:2018+AC:2020 , EN IEC 60079-11:2024 , EN IEC 60079-7:2015/A1:2018 |
| Directive 2014/34/EU EN IEC 60079-0:2018+AC:2020 , EN IEC 60079-11:2024 , EN IEC 60079-7:2015/A1:2018 | Directive 2014/34/EU | EN IEC 60079-0:2018+AC:2020 , EN IEC 60079-11:2024 , EN IEC 60079-7:2015/A1:2018 |
| Display elements | LED |
| Electromagnetic compatibility | NE 21:2017 EN 61326-3-2:2018 For further information see system description. |
| Equipment | SL2: 5a(+), 5b(-) |
| EU-type examination certificate | CESI 06 ATEX 017 |
| Factory setting | output: current source |
| FM certificate | FM 19 US 0122 X , FM 19 CA 0065 X |
| FM certificate FM 19 US 0122 X , FM 19 CA 0065 X Control drawing 116-0470 (cFMus) | FM certificate | FM 19 US 0122 X , FM 19 CA 0065 X | Control drawing | 116-0470 (cFMus) |
| IECEx certificate | IECEx CES 06.0002X |
| IECEx certificate IECEx CES 06.0002X IECEx marking [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I Ex ec IIC T4 Gc | IECEx certificate | IECEx CES 06.0002X | IECEx marking | [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I Ex ec IIC T4 Gc |
| IECEx marking | [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I Ex ec IIC T4 Gc |
| Input | Ex ia |
| Input/Output | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Input signal | 4 ... 20 mA limited to approx. 26 mA |
| Internal capacitance | C i | 5.7 nF |
| Internal inductance | L i | negligible |
| Labeling | space for labeling at the front |
| Load | 0 ... 350 Ω (source mode) |
| Marking | II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I |
| Marking II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I Input Ex ia | Marking | II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I | Input | Ex ia |
| Marking II 3G Ex ec IIC T4 Gc | Marking | II 3G Ex ec IIC T4 Gc |
| Mass | approx. 100 g |
| Output signal | source mode: 4 ... 20 mA or 1 ... 5 V (internal resistor: 250 Ω, 0.1 %) sink mode: 4 ... 20 mA, operating voltage 10 ... 30 V For additional internal or external loads the voltage drop has to be considered, e. g. 250 Ω x 20 mA = 5 V. |
| Safety Integrity Level (SIL) | SIL 2 |
| Signal type | Analog input |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Systematic capability (SC) | SC 3 |
| UL approval | E106378 |
Documents
No documents are linked to this part yet.