119101

Active

Thru-beam sensor (receiver)

All alternatives

Technical parameters

Power
No-load supply current	I 0 \| Receiver: ≤ 8 mA
Operating voltage	U B \| 10 ... 30 V DC , class 2
Switching current	max. 50 mA , resistive load
Switching voltage	max. 30 V DC
Voltage drop	U d \| ≤ 1.5 V DC
AC and DC characteristics
Switching frequency	f \| approx. 800 Hz
Environment and package
Ambient temperature	-25 ... 60 °C (-13 ... 140 °F)
Height	26 mm
Height 26 mm Width 7.5 mm Depth 13.8 mm	Height \| 26 mm \| Width \| 7.5 mm \| Depth \| 13.8 mm
Storage temperature	-30 ... 70 °C (-22 ... 158 °F)
Other
Ambient light limit	EN 60947-5-2 : 30000 Lux
Angle deviation	approx. 2 °
Cable	PUR
Cable length	200 mm
CCC approval	CCC approval / marking not required for products rated ≤36 V
Connection	200 mm fixed cable with 3-pin, M8 x 1 connector
Degree of protection	IP67
Depth	13.8 mm
Diagnostic Coverage (DC)	0 %
Effective detection range	Long range mode: 0 ... 2 m High precision mode: 0 ... 200 mm
Function indicator	Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the operating reserve ; OFF when light beam is interrupted
Housing	PC/ABS and TPU
Housing PC/ABS and TPU Optical face PC Cable PUR	Housing \| PC/ABS and TPU \| Optical face \| PC \| Cable \| PUR
Light source	LED
Light type	modulated visible red light , 630 nm
Mass	approx. 20 g per sensor
Mission Time (T M )	20 a
MTTF d	806 a
Opening angle	approx. 2 °
Operation indicator	LED green, statically lit Power on , short-circuit : LED green flashing (approx. 4 Hz)
Optical face	frontal
Product standard	EN 60947-5-2
Response time	600 µs
Signal output	1 PNP output, short-circuit protected, reverse polarity protected, open collector
Switching type	NC contact / light on
Threshold detection range	Long range mode: 2.5 m High precision mode: 300 mm
UL approval	cULus Recognized, Class 2 Power Source
Width	7.5 mm

Documents

No documents are linked to this part yet.