All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| No-load supply current | I 0 | 12 mA |
| Operating voltage | U B | 15 ... 30 V |
| Rated impulse withstand voltage | U imp | 500 V |
| Rated insulation voltage | U i | 30 V |
| Rated insulation voltage U i 30 V Rated impulse withstand voltage U imp 500 V | Rated insulation voltage | U i | 30 V | Rated impulse withstand voltage | U imp | 500 V |
| AC and DC characteristics | |
| Repeat accuracy | ± 1 % of full-scale value |
| Settling time | ≤ 100 ms |
| Environment and package | |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Mounting | with nuts, M12 |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Temperature drift | ± 10 % of full-scale value |
| Other | |
| Actuating element | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 12 mm x 12 mm x 1 mm |
| Bending radius | > 10 x cable diameter |
| Cable diameter | 4.3 mm ± 0.15 mm |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Color | black |
| Connection type | cable |
| Core cross section | 0.34 mm 2 |
| Degree of protection | IP65 / IP67 |
| Diagnostic Coverage (DC) | 0 % |
| Diameter | 12 mm |
| Housing material | brass , white bronze coated |
| Installation | flush |
| Length | L | 2 m |
| Length 43 mm Diameter 12 mm | Length | 43 mm | Diameter | 12 mm |
| Linearity error | ± 3 % of full-scale value |
| Load resistor | ≥ 500 Ω |
| Mass | 82 g |
| Material | PVC |
| Measuring range | 0 ... 4 mm |
| Mission Time (T M ) | 20 a |
| MTTF d | 941 a |
| Number of cores | 3 |
| Output polarity | DC |
| Output type | Analog voltage output |
| Protection class | II |
| PWIS conformity | VDMA 24364-C1/T100°C-W |
| Recovery time | ≤ 50 ms |
| Reverse polarity protection | reverse polarity protected |
| Scope of delivery | 2 self locking nuts in scope of delivery |
| Sensing face | PBT , green |
| Short-circuit protection | current limited |
| Slope of output characteristic | 2.5 V / mm |
| Standards | EN IEC 60947-5-2 EN IEC 60947-5-7 |
| Standards EN IEC 60947-5-2 EN IEC 60947-5-7 | Standards | EN IEC 60947-5-2 EN IEC 60947-5-7 |
| Status indicator | LED, yellow permanently on: damping element within measuring range slowly flashing (2 Hz): damping element outside measuring range fast flashing (10 Hz): fault state |
| Tightening torque | ≤ 10 Nm |
| UL approval | cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC |
| Wire end ferrules | yes |
Documents
No documents are linked to this part yet.