118431

Active

Vibration sensor with switching output and analog current output

All alternatives

Technical parameters

Power
Current consumption	max. 220 mA
Operating current	≤ 100 mA
Operating voltage	U B \| 18 ... 30 V DC
Output current	4 ... 20 mA
Power consumption	P 0 \| max. 6.6 W
Voltage drop	< 2 V
AC and DC characteristics
Frequency range	10 ... 1000 Hz
Measurement accuracy	± 0.1 mm/s (calibration point: 90% of the measuring range; 159.2 Hz) Complies with the tolerance requirements of DIN ISO 2954 for measuring range greater than 8 mm/s
Time delay before availability	t v \| 2 s (rms filter is calculated intially with measurement data before they are available at the output)
Environment and package
Ambient temperature	-40 ... 85 °C (-40 ... 185 °F)
Maximum permissible ambient temperature	max. 80 °C (max. 176 °F)
Storage temperature	-40 ... 85 °C (-40 ... 185 °F)
Other
Averaging time	for v-rms: 2 s
Connection type	plug
Cross-sensitivity	< 5 % of the partial lateral acceleration, which acts exactly 90° to the measuring axis
Degree of protection	DIN EN 60529, IP66, IP67
Diagnostic Coverage (DC)	0 %
Diameter	23.8 mm
Fusing	external fuse is required: 1 A , fast acting , 30 V DC
Housing material	Stainless steel 1.4305 / AISI 303
Length	72.5 mm
Length 72.5 mm Diameter 23.8 mm	Length \| 72.5 mm \| Diameter \| 23.8 mm
Load resistor	≤ 500 Ω
Mass	approx. 100 g
Measured variable	Vibration velocity
Measuring technology	MEMS
Mission Time (T M )	20 a
MTTF d	329 a
Number of pins	4
Ordinary Location	E468231 cULus Listed, Class III Power Source and limited energy , if UL marking is marked on the product. For use in NFPA 70 Applications only. adapters providing field wiring on request
Output type	analog output, current output of the vibration variable
Preset response time	2 s (minimum time for a vibration event above the switching threshold so that the output switches)
Series	Performance Line
Shock resistance	DIN EN 60068-2-27, 60 g , 6 ms
Short-circuit protection	yes
Surge protection	up to 2 kV
Switching function	Normally closed (NC)
Switching threshold	1.6 mm/s ( 10 % of the measuring range )
Threading	M12
Threading M12 Number of pins 4	Threading \| M12 \| Number of pins \| 4
Type	Vibration sensor
Vibration evaluation	DIN ISO 10816/20816
Vibration resistance	DIN EN 60068-2-6, 16.5 g, 10 ... 1000 Hz
Vibration velocity	v-rms \| 0 ... 16 mm/s
Vibration velocity v-rms 0 ... 16 mm/s	Vibration velocity \| v-rms \| 0 ... 16 mm/s

Documents

No documents are linked to this part yet.