115732

Active

Thru-beam sensor (pair)

All alternatives

Technical parameters

Power
No-load supply current	I 0 \| < 25 mA
Operating voltage	U B \| 10 ... 30 V DC
Switching current	max. 100 mA , resistive load
Switching voltage	max. 30 V DC
Voltage drop	U d \| ≤ 2 V DC
AC and DC characteristics
Ripple	max. 10 %
Switching frequency	f \| 500 Hz
Environment and package
Ambient temperature	-40 ... 60 °C (-40 ... 140 °F)
Length 65.1 mm Diameter 18 mm Thread size M18	Length \| 65.1 mm \| Diameter \| 18 mm \| Thread size \| M18
Storage temperature	-40 ... 70 °C (-40 ... 158 °F)
Thread size	M18
Other
Ambient light limit	EN 60947-5-2 10000 Lux
Connection	4-pin, M12 x 1 connector
Connector	Plastic
Control elements	light/dark on electrically switchable
Degree of protection	IP67
Diagnostic Coverage (DC)	0 %
Diameter	18 mm
Diameter of the light spot	approx. 110 mm at 1 m
Effective detection range	0 ... 10 m
Emitter	OBE10M-18GM60-S-V1-1C
Function indicator	Receiver: yellow LED permanently lit - output active permanently off - output inactive flashing (4 Hz) - insufficient operating reserve
Housing	brass, nickel-plated
Housing brass, nickel-plated Optical face PMMA Connector Plastic	Housing \| brass, nickel-plated \| Optical face \| PMMA \| Connector \| Plastic
Length	65.1 mm
Light source	LED
Light type	modulated visible red light
Mass	approx. 23 g per device
Mission Time (T M )	20 a
MTTF d	564 a
Opening angle	approx. 2.9 °
Operation indicator	LED green: on - power on flashing (4 Hz) - short circuit
Optical face	frontal
Product standard	EN 60947-5-2
Protection class	III
Receiver	OBE10M-18GM60-E5-V1-1C
Response time	≤ 1 ms
Signal output	1 PNP output, short-circuit protected, reverse polarity protected, open collector
Switching type	The switching type of the sensor is adjustable. The default setting is: Q - Pin4: PNP output / light-on L/D-On - Pin2: Low-active input
Threshold detection range	17 m
UL approval	E87056 , cULus Listed , class 2 power supply , type rating 1

Documents

No documents are linked to this part yet.