1150

Active

Inductive sensor

All alternatives

Technical parameters

Power
No-load supply current	I 0 \| ≤ 11 mA
Operating current	I L \| 0 ... 200 mA
Operating voltage	U B \| 10 ... 60 V
Voltage drop	U d \| ≤ 3 V
Voltage drop I L = 100 mA, switching element on	U d \| 1.2 ... 2.5 V
Voltage drop I L = 100 mA, switching element on U d 1.2 ... 2.5 V	Voltage drop I L = 100 mA, switching element on \| U d \| 1.2 ... 2.5 V
AC and DC characteristics
Switching frequency	f \| 0 ... 3000 Hz
Time delay before availability	t v \| ≤ 20 ms
Environment and package
Ambient temperature	-25 ... 70 °C (-13 ... 158 °F)
Storage temperature	-40 ... 85 °C (-40 ... 185 °F)
Other
Actual operating distance	s r \| 1.8 ... 2.2 mm typ.
Assured operating distance	s a \| 0 ... 1.62 mm
Bending radius	> 10 x cable diameter
Cable diameter	4.8 mm ± 0.2 mm
CCC approval	Certified by China Compulsory Certification (CCC)
Color	black
Connection type	cable
Core cross section	0.34 mm 2
Degree of protection	IP67
Diagnostic Coverage (DC)	0 %
Diameter	12 mm
Housing material	Stainless steel 1.4305 / AISI 303
Hysteresis	H \| 1 ... 10 % typ. 3 %
Installation	flush
Length	L \| 2 m
Length 40 mm Diameter 12 mm	Length \| 40 mm \| Diameter \| 12 mm
Material	PUR
Mission Time (T M )	20 a
MTTF d	1200 a
Number of cores	3
Output polarity	DC
Output type	NPN
Rated operating distance	s n \| 2 mm
Reduction factor r 304	0.7
Reduction factor r Al	0.23
Reduction factor r Cu	0.21
Reverse polarity protection	reverse polarity protected
Scope of delivery	2 self locking nuts in scope of delivery
Sensing face	PBT
Short-circuit protection	pulsing
Standards	EN IEC 60947-5-2
Standards EN IEC 60947-5-2	Standards \| EN IEC 60947-5-2
Switching function	Normally open (NO)
Switching state indicator	LED, yellow
UL approval	cULus Listed Load Type: Resistive Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 60 V DC Output Switching Current: 200 mA
Wire end ferrules	yes

Documents

No documents are linked to this part yet.