All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| Lowest operating current | I m | 2 mA |
| Off-state current | I r | ≤ 200 µA |
| Operating current | I L | 2 ... 30 mA |
| Operating voltage | U B | 4 ... 30 V |
| Voltage drop | U d | ≤ 4 V |
| AC and DC characteristics | |
| Switching frequency | f | 0 ... 500 Hz |
| Environment and package | |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Other | |
| Actual operating distance | s r | 7.2 ... 8.8 mm |
| Assured operating distance | s a | 0 ... 6.48 mm |
| Bending radius | > 10 x cable diameter |
| Cable diameter | 4.8 mm ± 0.2 mm |
| Color | grey |
| Connection type | cable |
| Core cross section | 0.34 mm 2 |
| Degree of protection | IP67 |
| Diagnostic Coverage (DC) | 0 % |
| Diameter | 18 mm |
| Equipment protection level Dc (tc) | IECEx TUR 21.0018X |
| Equipment protection level Gc (ec) | IECEx TUR 21.0017X |
| Equipment protection level Gc (ec) IECEx TUR 21.0017X Equipment protection level Dc (tc) IECEx TUR 21.0018X | Equipment protection level Gc (ec) | IECEx TUR 21.0017X | Equipment protection level Dc (tc) | IECEx TUR 21.0018X |
| Equipment protection level Gc (ec) TÜV 20 ATEX 8523 X Equipment protection level Dc (tc) TÜV 20 ATEX 8524 X | Equipment protection level Gc (ec) | TÜV 20 ATEX 8523 X | Equipment protection level Dc (tc) | TÜV 20 ATEX 8524 X |
| Hazardous Location | 2024322315005977 2024322315005859 |
| Hazardous Location 2024322315005977 2024322315005859 | Hazardous Location | 2024322315005977 2024322315005859 |
| Hazardous Location 23-AV4BO-0237X | Hazardous Location | 23-AV4BO-0237X |
| Housing material | Stainless steel 1.4305 / AISI 303 |
| Hysteresis | H | 1 ... 10 % typ. 5 % |
| Installation | non-flush |
| Length | L | 2 m |
| Length 56 mm Diameter 18 mm | Length | 56 mm | Diameter | 18 mm |
| Mass | 109 g |
| Material | PVC |
| Mission Time (T M ) | 20 a |
| MTTF d | 1581 a |
| Number of cores | 2 |
| Output polarity | DC |
| Output type | Two-wire with minimum off-state current |
| Rated operating distance | s n | 8 mm |
| Reduction factor r 304 | 0.7 |
| Reduction factor r Al | 0.4 |
| Reduction factor r Cu | 0.35 |
| Reverse polarity protection | yes |
| Scope of delivery | 2 self locking nuts in scope of delivery |
| Sensing face | PBT |
| Short-circuit protection | pulsing |
| Standards | EN IEC 60947-5-2 |
| Standards EN IEC 60947-5-2 | Standards | EN IEC 60947-5-2 |
| Switching function | Normally open (NO) |
| Switching state indicator | all direction LED, yellow |
| UL approval | cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 30 mA |
| Use in the hazardous area | see instruction manuals |
| Wire end ferrules | yes |
Documents
No documents are linked to this part yet.