102307

Active

Universal Input/Output (HART)

All alternatives

Technical parameters

Power
Current	0 ... 20 mA short-circuit protected
Current limit	I max \| 22 mA
Input/power supply, internal bus	safe electrical isolation acc. to EN 60079-11, voltage peak value 375 V
Input/power supply, internal bus safe electrical isolation acc. to EN 60079-11, voltage peak value 375 V	Input/power supply, internal bus \| safe electrical isolation acc. to EN 60079-11, voltage peak value 375 V
Number of channels	4
Open loop voltage	U s \| min. 22.7 V
Power consumption	3 W
Power dissipation	2 W
Rated voltage	U r \| 12 V DC , only in connection with the power supplies FB92**
Test current	0.4 mA
Test current 0.4 mA Short-circuit < 50 Ω Open-circuit < 0.2 mA	Test current \| 0.4 mA \| Short-circuit \| < 50 Ω \| Open-circuit \| < 0.2 mA
Transmitter supply voltage	min. 15 V at 20 mA ; 21.5 V at 4 mA
AC and DC characteristics
Resolution	12 Bit (0 ... 26 mA)
Environment and package
After calibration 0.1 % of the signal range at 20 °C (68 °F) Influence of ambient temperature 0.1 %/10 K of the signal range	After calibration \| 0.1 % of the signal range at 20 °C (68 °F) \| Influence of ambient temperature \| 0.1 %/10 K of the signal range
Ambient temperature	-20 ... 60 °C (-4 ... 140 °F)
Field device pressure converter Field device [2] flow converter Field device [3] level converter Field device [4] Temperature Converter	Field device \| pressure converter \| Field device [2] \| flow converter \| Field device [3] \| level converter \| Field device [4] \| Temperature Converter
Height	107 mm
Height 107 mm Width 28 mm Depth 132 mm	Height \| 107 mm \| Width \| 28 mm \| Depth \| 132 mm
Influence of ambient temperature	0.1 %/10 K of the signal range
Storage temperature	-25 ... 85 °C (-13 ... 185 °F)
Other
After calibration	0.1 % of the signal range at 20 °C (68 °F)
ATEX approval	FIDI 21 ATEX 0013 U
Coding	optional mechanical coding via front socket
Connection	backplane bus
Connection [2]	volt-free contact
Connection [2] volt-free contact	Connection [2] \| volt-free contact
Connection 2-wire transmitter	Connection \| 2-wire transmitter
Connection mechanical switch with additional resistors (see connection diagram) Short-circuit > 7 mA Open-circuit < 0.1 mA	Connection \| mechanical switch with additional resistors (see connection diagram) \| Short-circuit \| > 7 mA \| Open-circuit \| < 0.1 mA
Damaging gas	EN 60068-2-42
Degree of protection	IEC 60529
Depth	132 mm
Directive 2014/30/EU	EN 61326-1:2013
Directive 2014/30/EU EN 61326-1:2013	Directive 2014/30/EU \| EN 61326-1:2013
Directive 2014/34/EU	EN 60079-0:2018 EN 60079-1:2014 EN 60079-5:2015 EN 60079-7:2015+A1:2018
Directive 2014/34/EU EN 60079-0:2018 EN 60079-1:2014 EN 60079-5:2015 EN 60079-7:2015+A1:2018	Directive 2014/34/EU \| EN 60079-0:2018 EN 60079-1:2014 EN 60079-5:2015 EN 60079-7:2015+A1:2018
Drive capability	12 V / 22 mA
Electromagnetic compatibility	NE 21:2007
Environmental test	EN 60068-2-14
EU-type examination certificate	FIDI 21 ATEX 0013 U
Field device	pressure converter
Field device [2]	flow converter
Field device [3]	level converter
Field device [4]	Temperature Converter
Field device Proportional Valve Field device [2] I/P converters Field device [3] on-site display	Field device \| Proportional Valve \| Field device [2] \| I/P converters \| Field device [3] \| on-site display
Field device Solenoid Valve Field device [2] audible alarm Field device [3] visual alarm	Field device \| Solenoid Valve \| Field device [2] \| audible alarm \| Field device [3] \| visual alarm
HART communication	yes
HART secondary variable	yes
IECEx certificate	IECEx FIDI 21.0003U
IECEx certificate IECEx FIDI 21.0003U IECEx marking Ex db eb q IIC Gb	IECEx certificate \| IECEx FIDI 21.0003U \| IECEx marking \| Ex db eb q IIC Gb
IECEx marking	Ex db eb q IIC Gb
Input resistance	15 Ω
Interface	manufacturer-specific bus to standard com unit
Internal resistor	R i \| 385 Ω
LED indication	Power LED (P) green: supply Diagnostic LED (I) red: module fault , red flashing: communication error , white: fixed parameter set (parameters from com unit are ignored) , white flashing: requests parameters from com unit Status LED (1-4) red: line fault (lead breakage or short circuit) , yellow: state of digital I/O (0/1) Configuration LED (AI, AO, DI, DO) white: selected channel mode
Line fault detection	can be switched on/off for each channel via configuration tool , configurable via configuration tool
Load	max. 750 Ω at 20 mA
Marking	II 2G Ex db eb q IIC Gb
Marking II 2G Ex db eb q IIC Gb	Marking \| II 2G Ex db eb q IIC Gb
Mass	approx. 425 g
Occupied slots	1
Open-circuit	factory setting: < 3.6 mA Can be parameterized in the range 0 ... 22 mA
Refresh time	approx. 100 ms (4 channels)
Relative humidity	EN 60068-2-78
Shock resistance	EN 60068-2-27
Short-circuit	factory setting: > 21 mA Can be parameterized in the range 0 ... 22 mA
Short-circuit factory setting: < 50 Ω configurable between 0 ... 26 mA Open-circuit deviation of preset output value > 0.5 mA	Short-circuit \| factory setting: < 50 Ω configurable between 0 ... 26 mA \| Open-circuit \| deviation of preset output value > 0.5 mA
Supplementary information	EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.
Switching point: OFF	< 1.2 mA
Switching point: ON	> 2.1 mA
Switching point: ON > 2.1 mA Switching point: OFF < 1.2 mA	Switching point: ON \| > 2.1 mA \| Switching point: OFF \| < 1.2 mA
System information	The module has to be mounted in appropriate backplanes and housings (FB92**) in Zone 1, 2, 21, 22 or outside hazardous areas (gas or dust). Here, observe the corresponding EC-type examination certificate.
Vibration resistance	EN 60068-2-6
Watchdog	output off 0.5 s after serious fault
Width	28 mm

Documents

No documents are linked to this part yet.