All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| Measuring plate not detected ≥ 3 mA at nominal voltage Measuring plate detected ≤ 1 mA at nominal voltage | Measuring plate not detected | ≥ 3 mA at nominal voltage | Measuring plate detected | ≤ 1 mA at nominal voltage |
| Nominal voltage | U o | 8.2 V (R i approx. 1 kΩ) |
| Operating voltage | U B | 5 ... 25 V |
| AC and DC characteristics | |
| Switching frequency | f | 0 ... 1500 Hz |
| Environment and package | |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Height | 45 mm |
| Height 45 mm Width 29 mm Length 25 mm | Height | 45 mm | Width | 29 mm | Length | 25 mm |
| Other | |
| Bending radius | > 10 x cable diameter |
| Cable diameter | 4.8 mm ± 0.2 mm |
| Cable diameter 4.8 mm ± 0.2 mm Bending radius > 10 x cable diameter Material PVC Core cross section 0.34 mm 2 Length L 2 m | Cable diameter | 4.8 mm ± 0.2 mm | Bending radius | > 10 x cable diameter | Material | PVC | Core cross section | 0.34 mm 2 | Length | L | 2 m |
| Connection type | cable |
| Control drawing | 116-0165 |
| Control drawing 116-0165 | Control drawing | 116-0165 |
| Core cross section | 0.34 mm 2 |
| Degree of protection | IP67 |
| Diagnostic Coverage (DC) | 0 % |
| Diameter | 3 mm |
| Diameter 3 mm Length 4 mm | Diameter | 3 mm | Length | 4 mm |
| Equipment protection level Gb | PTB 99 ATEX 2128 X |
| Equipment protection level Gb PTB 99 ATEX 2128 X | Equipment protection level Gb | PTB 99 ATEX 2128 X |
| Housing material | PBT |
| Inside diameter | 15 mm |
| Length | 4 mm |
| Material | PVC |
| Measuring plate detected | ≤ 1 mA at nominal voltage |
| Measuring plate not detected | ≥ 3 mA at nominal voltage |
| Mission Time (T M ) | 20 a |
| MTTF d | 9340 a |
| NAMUR | EN 60947-5-6:2000 IEC 60947-5-6:1999 |
| NAMUR EN 60947-5-6:2000 IEC 60947-5-6:1999 Standards EN IEC 60947-5-2 | NAMUR | EN 60947-5-6:2000 IEC 60947-5-6:1999 | Standards | EN IEC 60947-5-2 |
| Output type | NAMUR |
| Standards | EN IEC 60947-5-2 |
| Switching function | Normally closed (NC) |
| UL approval | cULus Listed Load Type: Resistive Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 8.2 V DC |
| Use in the hazardous area | see instruction manuals |
| Width | 29 mm |
Documents
No documents are linked to this part yet.