Pepperl+Fuchs, Inc.Germany
101254
ActiveSolid-state scanner for personal safety on automatic doors in accordance with DIN 18650/EN 16005, DIN left/DIN right, NPN/PNP output, black housing
All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| Operating voltage | U B | 24 V DC +/- 20 % |
| Power consumption | P 0 | primary sensor 3.6 W secondary sensor 3.4 W |
| Switching current | max. 100 mA |
| Switching voltage | max. 30 V DC |
| Environment and package | |
| Ambient temperature | -30 ... 60 °C (-22 ... 140 °F) |
| DIP switch switch 1 ON switch 2 ON switch 3 ON switch 4 ON Adjuster Adjustment dial: position 6 = installation height 2100 mm | DIP switch | switch 1 ON switch 2 ON switch 3 ON switch 4 ON | Adjuster | Adjustment dial: position 6 = installation height 2100 mm |
| Height | 61.3 mm |
| Height 61.3 mm Depth 38.7 mm Length 255 mm | Height | 61.3 mm | Depth | 38.7 mm | Length | 255 mm |
| Mounting height | 1500 ... 2500 mm (0.5 m ... 1.8 m door width) 2500 ... 3000 mm (0.5 m ... 1.6 m door width) |
| Storage temperature | -30 ... 70 °C (-22 ... 158 °F) |
| Other | |
| Adjuster | Adjustment dial: position 6 = installation height 2100 mm |
| Category | Cat. 2 |
| Connection | Plug with connection cable , 8-wire |
| Control elements | Teach-In key , DIP switch for selection of operating modes |
| Degree of protection | IP65 |
| Depth | 38.7 mm |
| Diagnostic Coverage (DC) | 94 % |
| Diameter of the light spot | 8 cm at 2000 mm sensor range |
| DIP switch | switch 1 ON switch 2 ON switch 3 ON switch 4 ON |
| Functional safety | ISO 13849-1 ; EN 61508 part1-4 |
| Function indicator | Status LED red/green/orange Teach-in, errors, switch state LED red: Switch indicator for door hinge side LED green: Switch indicator for hinge opposite side |
| Housing | PC (Polycarbonate) |
| Housing PC (Polycarbonate) Optical face PC (Polycarbonate) | Housing | PC (Polycarbonate) | Optical face | PC (Polycarbonate) |
| Length | 255 mm |
| Light source | IRED 850 nm |
| Mass | approx. 500 g (kit) |
| MTTF d | > 100 a |
| Number of beams | 20 |
| Optical face | PC (Polycarbonate) |
| Performance level (PL) | PL d |
| Product standard | EN 12978 ; EN 16005 ; DIN 18650 |
| Protection class | III |
| Relative humidity | 25% ... 95% , non-condensing |
| Response time | ≤ 50 ms with installation height ≤ 2500 mm ≤ 80 ms with installation height > 2500 mm |
| Safety Integrity Level (SIL) | SIL 2 |
| Scope of delivery | Sensor system for hinge side and leading edge side (1 primary sensor and 1 secondary sensor, connecting cable, door transition cable, corrugated hose with wall bracket, 2 x 3 self-tapping screws, drilling template, cable seal with IP65 degree of protection) |
| Signal output | NPN , PNP , short-circuit protected , switchable |
| Switching type | switching when protection field is clear |
| Test input | High at U = 10 V DC ... 30 V DC Low at U = < 2 V DC |
| TÜV approval | TÜV NORD |
Documents
No documents are linked to this part yet.