CT-6

NIDEC COMPONENTS products lineup, You can refer to the detail of Trimmer potentiometer CT-6. Cermet Trimmer potentiometer CT-6ETP CT-6EP CT-6EMP CT-6EW CT-6ER CT-6ETV CT-6EV CT-6EMS CT-6ES CT-6EH CT-6EN CT-6EX CT-6ETH CT-6EF CT6ETP CT6EP CT6EMP CT6EW CT6ER CT6ETV CT6EV CT6EMS CT6ES CT6EH CT6EN CT6EX CT6ETH CT6EF chemSHERPA-download-available chemSHERPA-AI_ver.2.12.00_available

全部替代型号

查看完整报告

技术参数

电源
Maximum input voltage200 VDC or power rating, whichever is smaller
Maximum wiper current100 mA or power rating, whichever is smaller
Power ratings0.5 W (70 °C) 0 W (120 °C)
环境与封装
Operating temp. range- 55 ~ 120 °C
Temp. coefficient10 Ω ~ 20 Ω: ± 250 10-6 / °C maximum50 Ω ~ 2 MΩ: ± 100 10-6 / °C maximum
其他
C.R.V.1 % or 3 Ω , whichever is greater
Dielectric strength500 VAC, 60 s
Effective electrical angle220 ° (1 turn)
End resistance1 % or 2 Ω , whichever is greater
Insulation resistance1000 MΩ minimum (500 VDC)
Mechanical angle260 ° (1 turn)
Net weightApprox. 0.51 g (CT-6EP, EW, ER, EV)Approx. 0.65 g (CT-6ES, EX, EH, EN)Approx. 0.92 g (CT-6EF)
Nominal resistance range10 Ω ~ 2 MΩ
Nominal resistance values10 Ω*, 20 Ω*, 50 Ω, 100 Ω, 200 Ω, 500 Ω, 1 kΩ, 2 kΩ, 5 kΩ, 10 kΩ, 20 kΩ, 50 kΩ, 100 kΩ, 200 kΩ, 500 kΩ, 1 MΩ, 2 MΩ
Operating torque2 ~ 20 mN·m {20 ~ 204 gf·cm}
Resistance lawLinear law(B)
Resistance tolerance± 10 %
Rotational life200 cycles [ΔR/R ≦ ± (2 Ω +3 %)]
Solderability245 ± 3 °C, 2 ~ 3 s
Stop strength50 mN・m {20 ~ 204 gf·cm} minimum
Teminal strength10 N {1.02 kgf} minimum(Tensile strength)
Thrust to rotor10 N {1.02 kgf} minimum

器件图片

技术资料