全部替代型号
查看完整报告技术参数
| 电源 | |
|---|---|
| No-load supply current | I 0 | Emitter: ≤ 14 mA Receiver: ≤ 13 mA at 24 V supply voltage |
| Operating voltage | U B | 10 ... 30 V DC |
| Switching current | max. 100 mA , resistive load |
| Switching voltage | max. 30 V DC |
| Voltage drop | U d | ≤ 1.5 V DC |
| 交流 / 直流特性 | |
| Ripple | max. 10 % |
| Switching frequency | f | 1000 Hz |
| 环境与封装 | |
| Ambient temperature | -40 ... 60 °C (-40 ... 140 °F) , cable, fixed installation -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains |
| Height | 33.8 mm |
| Height 33.8 mm Width 13.9 mm Depth 18.3 mm | Height | 33.8 mm | Width | 13.9 mm | Depth | 18.3 mm |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
| 其他 | |
| Ambient light limit | EN 60947-5-2 : 30000 Lux |
| Cable length | 2 m |
| Compatible master port type | A |
| Connection | 2 m fixed cable |
| Control elements | Receiver: light/dark switch |
| Degree of protection | IP67 / IP69 / IP69K |
| Depth | 18.3 mm |
| Device ID | Emitter: 0x110405 (1115141) Receiver: 0x110305 (1114885) |
| Diagnostic Coverage (DC) | 0 % |
| Diameter of the light spot | approx. 65 mm at a distance of 1 m |
| Effective detection range | 0 ... 12 m |
| EMC Directive 2004/108/EC | EN 60947-5-2:2007+A1:2012 |
| EMC Directive 2004/108/EC EN 60947-5-2:2007+A1:2012 | EMC Directive 2004/108/EC | EN 60947-5-2:2007+A1:2012 |
| Emitter | OBE12M-R102-S-IO |
| Function indicator | Yellow LED: Permanently lit - light path clear Permanently off - object detected Flashing (4 Hz) - insufficient operating reserve |
| Housing | PC (Polycarbonate) |
| Housing PC (Polycarbonate) Optical face Float glass | Housing | PC (Polycarbonate) | Optical face | Float glass |
| Interface type | IO-Link ( via C/Q = pin 4 ) |
| IO-Link revision | 1.1 |
| LED risk group labelling | exempt group |
| Light source | LED |
| Light type | modulated visible red light |
| Mass | Emitter: approx. 10 g receiver: approx. 10 g |
| Min. cycle time | 2.3 ms |
| Mission Time (T M ) | 20 a |
| MTTF d | 462 a |
| Opening angle | 3.7 ° |
| Operation indicator | LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode |
| Optical face | Float glass |
| Parameterization indicator | IO link communication: green LED goes out briefly (1 Hz) |
| Process data width | Emitter: Process data output: 2 Bit Receiver: Process data input: 2 Bit Process data output: 2 Bit |
| Product standard | EN 60947-5-2:2007+A1:2012 IEC 60947-5-2:2007 + A1:2012 |
| Product standard EN 60947-5-2:2007+A1:2012 IEC 60947-5-2:2007 + A1:2012 Standards UL 60947-5-2: 2014 IEC 61131-9:2013 EN 62471:2008 EN 61131-9:2013 | Product standard | EN 60947-5-2:2007+A1:2012 IEC 60947-5-2:2007 + A1:2012 | Standards | UL 60947-5-2: 2014 IEC 61131-9:2013 EN 62471:2008 EN 61131-9:2013 |
| Protection class | III |
| Receiver | OBE12M-R102-2EP-IO |
| Response time | 0.5 ms |
| Signal output | 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected |
| SIO mode support | yes |
| Standards | UL 60947-5-2: 2014 IEC 61131-9:2013 EN 62471:2008 EN 61131-9:2013 |
| Switching type | The switching type of the sensor is adjustable. The default setting is: C/Q - BK: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link /Q - WH: NPN normally closed / light-on, PNP normally open / dark-on |
| Test input | emitter deactivation at +U B |
| Threshold detection range | 15 m |
| Transfer rate | COM2 (38.4 kBit/s) |
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| Usage category | DC-12 and DC-13 |
| Width | 13.9 mm |
器件图片
技术资料
该型号暂未收录资料。