全部替代型号
查看完整报告技术参数
| 电源 | |
|---|---|
| Current loading capacity | 75 mA at TB ≤ 40 °C (104 °F) 60 mA at TB ≤ 75 °C (167 °F) overload and short-circuit resistant |
| Input current | ≤ 9 mA (limited internally) |
| Rated operating current | I e | ≤ 40 mA (without sensors) / max. 120 mA |
| Rated operating voltage | U e | 18.5 ... 31.6 V from AS-Interface |
| Supply | from AS-Interface |
| Voltage | 21 ... 31 V |
| 交流 / 直流特性 | |
| Noise immunity | EN 61000-6-2:2005, EN 61326-1:2006, EN 62026-2:2013 |
| Signal delay | < 1 ms (input/AS-Interface) |
| 环境与封装 | |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Contacts CuSn / Au Housing PBT PC Cable PUR Mounting screw Stainless steel 1.4305 / AISI 303 | Contacts | CuSn / Au | Housing | PBT PC | Cable | PUR | Mounting screw | Stainless steel 1.4305 / AISI 303 |
| Height | 21.5 mm |
| Height 21.5 mm Width 27.7 mm Length 40.5 mm | Height | 21.5 mm | Width | 27.7 mm | Length | 40.5 mm |
| Maximum permissible ambient temperature | max. 65 °C (max. 149 °F) |
| Maximum permissible ambient temperature max. 65 °C (max. 149 °F) | Maximum permissible ambient temperature | max. 65 °C (max. 149 °F) |
| Mounting screw | Stainless steel 1.4305 / AISI 303 |
| Storage temperature | -25 ... 85 °C (-13 ... 185 °F) |
| 其他 | |
| 0 (unattenuated) | ≤ 3 mA |
| 0 (unattenuated) ≤ 3 mA 1 (attenuated) ≥ 5 mA | 0 (unattenuated) | ≤ 3 mA | 1 (attenuated) | ≥ 5 mA |
| 1 (attenuated) | ≥ 5 mA |
| AS-Interface | EN 62026-2:2013 |
| AS-Interface specification | V3.0 |
| Cable | PUR |
| Color | black |
| Connection | AS-Interface: AS-Interface flat cable Inputs & matching connector: M12 round connector, 4-pin, A-coded, according to IEC 61076-2-101:2012 |
| Contacts | CuSn / Au |
| Cores | 4 x 0.34 mm 2 |
| Degree of protection | EN 60529:2000 |
| Directive 2014/30/EU | EN 62026-2:2013 |
| Directive 2014/30/EU EN 62026-2:2013 | Directive 2014/30/EU | EN 62026-2:2013 |
| Emitted interference | EN 61000-6-4:2007 |
| Fieldbus standard | EN 62026-2:2013 |
| Housing | PBT PC |
| ID1 code | 7 |
| ID2 code | 2 |
| ID code | A |
| Input | EN 61131-2:2007 |
| IO code | 0 |
| IO code 0 ID code A ID1 code 7 ID2 code 2 | IO code | 0 | ID code | A | ID1 code | 7 | ID2 code | 2 |
| LED AS-i | AS-Interface voltage; LED green |
| LED FAULT | error display; LED red red: communication error or address is 0 red flashing: overload of sensor power supply or outputs |
| LED IN | switching state (input); 2 LED yellow |
| Length | L | 3 m |
| Mass | 100 g |
| Node type | A/B node |
| Number/Type | 2 inputs for 2- or 3-wire sensors (PNP), DC |
| Profile | S-0.A.2 |
| Protection class | III |
| Required gateway specification | ≥ V2.0 |
| Sheath diameter | ∅4,3 mm |
| Sheath diameter ∅4,3 mm Color black Cores 4 x 0.34 mm 2 Length L 3 m | Sheath diameter | ∅4,3 mm | Color | black | Cores | 4 x 0.34 mm 2 | Length | L | 3 m |
| Shock and impact resistance | 30 g , 11 ms in 6 spatial directions 3 shocks 10 g , 16 ms in 6 spatial directions 1000 shocks |
| Surge protection | U AUX , U in : Over voltage category III, safe isolated power supplies (PELV) |
| Switching point | according to DIN EN 61131-2 (Type 2) |
| Tightening torque, cable gland | 0.4 Nm |
| Tightening torque, fastening screws | 1.65 Nm |
| UL approval | cULus Listed, Type 1 enclosure |
| UL File Number | E223772 "For use in NFPA 79 Applications only" |
| Vibration resistance | 0.75 mm 10 ... 57 Hz , 5 g 57 ... 150 Hz, 20 cycles |
| Width | 27.7 mm |
器件图片
技术资料
该型号暂未收录资料。