| 其他 |
|---|
| Bezel | Circular Below Panel |
| Center Detect Output | Pulled high within joystick via 2K2 to +V, and smoothed to 0V with 100nF |
| Configuration | Standard |
| Electrical Specifications | Analog PWM CAN J1939 & CANopen outputs |
| EMC Emission | Complies with EN 61000-6-3:2001, CISPR 22:2005, Class B 30MHz–11GHz |
| EMC Immunity | 100V/m, 80MHz-2.7GHz, 1KHz 80% sine wave modulation, EN 61000-4-3 (extended) |
| ESD | Complies with EN61000-4-2 (extended) ±8KV (20 contacts) & ±15KV (20 air discharges) |
| Life Cycles | 10,000,000 cycles (5,000,000 for 3 axis joysticks) |
| Limiter | Cross |
| Loads | Minimum 10K, preferred 100K+ |
| Modifier | None |
| Output at Center | V/2 ±(5% x Gain) |
| Seal Above Panel | IP66 (dependant on configuration) |
| Sensor Type | Hall effect |
| Vibration | 100Hz – 200Hz @ 0.13g /Hz, total 3.6gRMS (1 Hour in each of the three mutually perpendicular axis) |
