131554
在产Thru-beam sensor, M18 threaded housing design, plastic housing, 10 m detection range, infrared light, light/dark on, DC version, 2 push-pull outputs, fixed cable with M12 plug
全部替代型号
查看完整报告技术参数
| 电源 | |
|---|---|
| No-load supply current | I 0 | Emitter: ≤ 17 mA Receiver: ≤ 13 mA |
| Operating voltage | U B | 10 ... 30 V DC |
| Switching current | max. 100 mA |
| Switching voltage | max. 30 V DC |
| Voltage drop | U d | ≤ 1.5 V DC |
| 交流 / 直流特性 | |
| Switching frequency | f | 80 Hz |
| 环境与封装 | |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Length 59 mm Diameter 18 mm Thread size M18 | Length | 59 mm | Diameter | 18 mm | Thread size | M18 |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Thread size | M18 |
| 其他 | |
| Accessories provided | Mounting nuts |
| Ambient light limit | 10000 Lux |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| CE conformity | CE |
| Connection | fixed cable with 4-pin, M12 x 1 connector Emitter: black ; Receiver: grey |
| Degree of protection | IP67 / IP68 |
| Diagnostic Coverage (DC) | 0 % |
| Diameter | 18 mm |
| Diameter of the light spot | approx. 1500 mm at a distance of 10 m |
| Effective detection range | 0 ... 10 m |
| Emitter | OBE10M-18GF60-S-0,3M-V1-IR |
| Function indicator | Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the operating reserve ; OFF when light beam is interrupted |
| Housing | PC , black |
| Housing PC , black Optical face Plastic pane | Housing | PC , black | Optical face | Plastic pane |
| Length | L | 0.3 m |
| Length L 0.3 m | Length | L | 0.3 m |
| Light source | IRED |
| Light type | modulated infrared light , 850 nm |
| Mass | approx. 25 g per device |
| Mission Time (T M ) | 20 a |
| MTTF d | 606 a |
| Opening angle | Emitter: ± 5 ° ; Receiver: ± 10 ° |
| Operation indicator | Emitter: LED green: Power on |
| Optical face | frontal |
| Product standard | EN 60947-5-2 |
| Protection class | Class III |
| Receiver | OBE10M-18GF60-2PP-0,3M-V1-IR |
| Relative humidity | 90 % , non-condensing |
| Response time | 6 ms |
| Signal output | 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected |
| Switching type | Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on /Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on |
| Test input | emitter deactivation at 0 V |
| Threshold detection range | 12 m |
| UKCA conformity | UKCA |
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
器件图片
技术资料
该型号暂未收录资料。