全部替代型号
查看完整报告技术参数
| 电源 | |
|---|---|
| Nominal voltage | U o | 8.2 V (R i approx. 1 kΩ) |
| 交流 / 直流特性 | |
| Switching frequency | f | 0 ... 100 Hz |
| 环境与封装 | |
| Ambient temperature | -25 ... 100 °C (-13 ... 212 °F) |
| 其他 | |
| ANZEx | 18.3018X |
| Assured operating distance | s a | 0 ... 16.2 mm |
| CML approval | on request |
| Connection type | terminal compartment |
| Core cross section | up to 2.5 mm 2 |
| Degree of protection | IP67 |
| Diagnostic Coverage (DC) | 0 % |
| Diameter | 40 mm |
| Equipment protection level Da | IECEx PTB 11.0037X |
| Equipment protection level Gb | IECEx PTB 11.0037X |
| Equipment protection level Gb IECEx PTB 11.0037X Equipment protection level Da IECEx PTB 11.0037X Equipment protection level Mb IECEx PTB 11.0037X | Equipment protection level Gb | IECEx PTB 11.0037X | Equipment protection level Da | IECEx PTB 11.0037X | Equipment protection level Mb | IECEx PTB 11.0037X |
| Equipment protection level Gb PTB 00 ATEX 2048 X Equipment protection level Da PTB 00 ATEX 2048 X | Equipment protection level Gb | PTB 00 ATEX 2048 X | Equipment protection level Da | PTB 00 ATEX 2048 X |
| Equipment protection level Mb | IECEx PTB 11.0037X |
| Hazardous Location | 2020322315002258 |
| Hazardous Location 2020322315002258 | Hazardous Location | 2020322315002258 |
| Housing material | PBT |
| Installation | non-flush |
| Length | 95 mm |
| Length 95 mm Diameter 40 mm | Length | 95 mm | Diameter | 40 mm |
| Measuring plate detected | ≤ 1 mA |
| Measuring plate not detected | min. 3 mA |
| Measuring plate not detected min. 3 mA Measuring plate detected ≤ 1 mA | Measuring plate not detected | min. 3 mA | Measuring plate detected | ≤ 1 mA |
| Mission Time (T M ) | 20 a |
| MTTF d | 11400 a |
| NAMUR | EN 60947-5-6:2000 IEC 60947-5-6:1999 |
| NAMUR EN 60947-5-6:2000 IEC 60947-5-6:1999 Standards EN IEC 60947-5-2 | NAMUR | EN 60947-5-6:2000 IEC 60947-5-6:1999 | Standards | EN IEC 60947-5-2 |
| Output type | NAMUR |
| Rated operating distance | s n | 20 mm |
| Reduction factor r 304 | 0.85 |
| Reduction factor r Al | 0.4 |
| Reduction factor r Cu | 0.3 |
| Sensing face | PBT |
| Standards | EN IEC 60947-5-2 |
| Switching function | Normally closed (NC) |
| UL approval | cULus Listed Load Type: Resistive Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 8.2 V DC |
| Use in the hazardous area | see instruction manuals |
器件图片
技术资料
该型号暂未收录资料。