All alternatives

View full report

Technical parameters

Environment and package
High temperature exposure85 °C, 16 h
Low temperature exposure- 40 °C, 16 h
Operating temperature range- 40 ~ 85 °C
Storage temperature range- 40 ~ 85 °C
Other
Adjustment torque60 ± 30 mN·m {612 ± 306 gf·cm}
Circuit typeBinary code
Contact ratingMaximum current 1 A Minimum current 1 μA Maximum voltage 30 V Minimum voltage 20 mV
Contact resistance100 mΩ maximum
Dielectric strength500 VAC, 60 s
Electrostatic capacity4 pF maximum, 10 kHz
Humidity (Steady state)40 °C, Relative humidity 90 ~ 95 %, 240 h
Insulation resistance1000 MΩ (500 VDC) minimum
Load life500,000 steps or 50,000 cycles at 6 positions with no load 200,000 steps or 20,000 cycles at 6 positions with rated load
Net weightApprox. 7 g
No. of positionsReal code: 12 maximum Complementary code: Below 8 maximum
SealingWashable (only contact block, “O” ring sealed)
Shock980 m/s2, 6 ms 6 directions for 3 times each
Solderability245 ± 3 °C, 2 ~ 3 s
Soldering heatFlow: 260 ± 3 °C as the temperature in a pot of molten solder, immer sion from head of terminal to backside of board, 5 ~ 6 s, two times maximum Manual soldering: 380 ± 10 °C, 3 ~ 4 s
Stepping angle30°
Terminal strength10 N {1.02 kgf} minimum
VibrationAmplitude 3 mm or Acceleration 196 m/s2, 10-2000-10 Hz, 3 directions for 4 h each

Documents