NE5232

Instrumentation, OP Amps, Buffer Amps8-Pin Plastic Small Outline

NE5232 is a dual-channel low-voltage high-performance operational amplifier with a single supply range of 2V to 5.5V, 2.5MHz bandwidth, and rail-to-rail input/output characteristics, available in SO-8 and DIP-8 packages.Checked against the datasheet

See alternatives Ask AI FAEDatasheet PDF

All alternatives

View full report

Technical parameters

Key specs

Supply voltage2 ~ 5.5 V

Gain bandwidth product2.5 MHzTyp

Input offset voltage4 mVMax · Max: ±4 mV (VCC=2V to 5.5V，VEE=0V，Tamb=25°C)

Quiescent current1.4 mATyp · Max: 2.0 mA (VCC=5.5V，Tamb=25°C)

Channels2

Datasheet-verified parameters

25 items

Parameter	Value and test conditions	Source
Single supply voltage	Min: +2 V, Max: +5.5 V
Unity gain bandwidth	Min: 2 MHz, Typ: 2.5 MHz, Max: 4.0 MHz (Over full temperature range)
Offset voltage	Typ: ±0.2 mV, Max: ±4 mV (VCC=2V to 5.5V, VEE=0V, Tamb=25°C)
Supply current	Typ: 1.4 mA, Max: 2.0 mA (VCC=5.5V, Tamb=25°C)
Channels	2
Package	8-Pin Plastic Small Outline (SO) package (SOT96-1) or 8-Pin Plastic Dual In-Line Package (DIP) (SOT97-1)
Operating temperature	0 °C to +70 °C
Grade	NE (Commercial)
Recommended operating conditions - Single supply voltage	+2 to +5.5 V
Recommended operating conditions - Dual supply voltage	±1 to ±2.75 V
Absolute maximum ratings - Single supply voltage	7 V
Absolute maximum ratings - Dual supply voltage	±3.5 V
Absolute maximum ratings - Power dissipation	500 mW
Absolute maximum ratings - Operating junction temperature	+150 °C
Absolute maximum ratings - Storage temperature range	-65 to +150 °C
Slew rate	Min: 0.5 V/µs, Typ: 0.8 V/µs (Over full temperature range)
Input referred voltage noise	Typ: 33 nV/√Hz (AV=1, RS=0Ω, at 1 kHz)
Common-mode rejection ratio	Min: 80 dB, Typ: 100 dB (Small signal, VEE < Vi(CM) < VEE+0.5V; VEE+1V < Vi(CM) < VCC)
Power supply rejection ratio	Min: 80 dB, Typ: 100 dB (VEE < Vi(CM) < VCC)
Open-loop voltage gain	Typ: 90 dB, Max: 110 dB
Output voltage swing	Min: VEE+0.05 V, Max: VCC-0.05 V (IPEAK=0.1 mA)
Peak load current	Min: 10 mA, Typ: 12 mA (Sink and source)
1% settling time	Typ: 1.4 µs (AV=1, 1 V step)
Electrostatic discharge protection	Yes (ESD protection voltage at any pin: 2000 V human body model)
Short-circuit protection	Yes

Pinout and package

Pin	Name	Function	Source
1		Output A
2		Inverting Input A
3		Non-inverting Input A
4		Negative Supply (V-)
5		Non-inverting Input B
6		Inverting Input B
7		Output B
8		Positive Supply (V+)

Documents

DatasheetDatasheet · 93.3 KB · 2026-10-26

Open document center

Datasheet-verified content is extracted by AI from the manufacturer datasheet. Click a page number to view the original.