All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| Protective gas supply | instrument grade air or inert gas |
| Environment and package | |
| Ambient temperature | -29 ... 49 °C (-20.2 ... 120.2 °F) |
| Other | |
| Connection | Terminal blocks |
| Connection type | System supply fitting: 3/8" tube fitting Enclosure supply fitting: 3/8" tube fitting Enclosure reference fitting: 1/4" tube fitting Switch conduit port size: 1/2" FPT |
| Contact loading | 120 VAC @ 15 A |
| cULus | Type Y LPS: Class II, Division 1, Groups E, F, and G WPS: Class II, Division 1, Groups E, F, and G Type Z LPS: Class II, Division 2, Groups E, F, and G WPS: Class II, Division 2, Groups E, F, and G |
| FM approval | Type Y LPS: Class II, Division 1, Groups E, F, and G WPS: Class II, Division 1, Groups E, F, and G Type Z LPS: Class II, Division 2, Groups E, F, and G WPS: Class II, Division 2, Groups E, F, and G |
| Hazardous environment | gas |
| Mass | 1001B-LPS-* 3.2 kg (7 lb) 1001B-WPS-* 5.4 kg (12 lb) |
| Material | Regulator body: zinc w/enamel finish Regulator handle: polycarbonate Enclosure pressure gauge: alum. w/enamel finish Tube fitting: 316 ss forged body Tubing: 316 ss 1/4" .035 welded System nameplate: silk screened Lexan ® & ss Fastener hardware: alum. & stainless steel Mounting plate: 316 14 ga #3 brush ss EXP pressure switch body: anodized cast aluminum Enclosure warning nameplate: silk screened ss |
| Output I | -WPS- |
| Output type | Switch contacts |
| Output type Switch contacts Contact loading 120 VAC @ 15 A | Output type | Switch contacts | Contact loading | 120 VAC @ 15 A |
| Pressure requirement | 5 - 120 psi (With EPV-3 vent. Systems installed without vent must be equipped with redundant regulator set to 5 psi max.) |
| Safe pressure | Setpoint: 1.0" (25.4 mm) Flow rate: 0.1 - 3.5 SCFH (2.8 - 99 l /hr) |
| Series | 1001B |
| System | Type Y Purge , Type Z Purge |
Documents
No documents are linked to this part yet.