全部替代型号
查看完整报告技术参数
| 电源 | |
|---|---|
| Operating voltage | U B | 10 ... 30 V DC |
| Power consumption | P 0 | ≤ 3.6 W (without read heads) |
| 交流 / 直流特性 | |
| Noise immunity | EN 61000-6-2:2005 |
| 环境与封装 | |
| Height | 111 mm |
| Height 111 mm Width 23 mm Depth 117 mm | Height | 111 mm | Width | 23 mm | Depth | 117 mm |
| Operating temperature | -40 ... 85 °C (-40 ... 185 °F) , no moisture condensation |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| 其他 | |
| Bus termination resistor | switchable |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Connectable read heads | WCS...-LS221 , WCS...-LS121 |
| Connection of | control system |
| Connection type | Interface 1: 9-pin Sub-D connector Interface 2: terminal connection ≤ 2.5 mm 2 Interface 3: Terminal connection, 2-pin |
| Data output format | binary code |
| Degree of protection | IP20 |
| Depth | 117 mm |
| Diagnostic Coverage (DC) | 0 % |
| Emitted interference | EN 55011, cl. A: 2007 |
| Installation | DIN rail mounting |
| Installation position | any position |
| Interface type | CANopen |
| Mass | approx. 130 g |
| Material | plastic |
| Mission Time (T M ) | 10 a |
| MTTF d | 180 a |
| Refresh cycle of read head | 1 ms |
| Relative humidity | ≤ 80 % |
| RS485 termination resistor | switchable |
| Transfer rate | max. 1 MBit/s |
| Transmission method | half duplex |
| Width | 23 mm |
器件图片
技术资料
该型号暂未收录资料。