72901
在产Switching diffuse mode sensor with measurement core technology, 150 mm detection range, red laser light, laser class 1, IO-Link, 2 x push-pull output, 2 m fixed cable
全部替代型号
查看完整报告技术参数
| 电源 | |
|---|---|
| No-load supply current | I 0 | < 20 mA at 24 V supply voltage |
| Operating voltage | U B | 10 ... 30 V DC |
| Switching current | max. 100 mA , resistive load |
| Switching voltage | max. 30 V DC |
| Voltage drop | U d | ≤ 1.5 V DC |
| 交流 / 直流特性 | |
| Ripple | max. 10 % |
| Switching frequency | f | 217 Hz |
| 环境与封装 | |
| Ambient temperature | -40 ... 60 °C (-40 ... 140 °F) , cable, fixed installation -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains |
| Height | 37.1 mm |
| Height 37.1 mm Width 11 mm Depth 21.5 mm | Height | 37.1 mm | Width | 11 mm | Depth | 21.5 mm |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
| 其他 | |
| Adjustment range | 20 ... 150 mm |
| Ambient light limit | EN 60947-5-2 : 30000 Lux |
| Beam divergence | > 5 mrad ; d63 < 1 mm in the range of 50 mm ... 250 mm |
| Black-white difference (6 %/90 %) | < 3 % at 150 mm |
| Cable length | 2 m |
| Communication interface | IEC 61131-9 |
| Compatible master port type | A |
| Connection | 2 m fixed cable |
| Control elements | Teach-In key |
| Degree of protection | IP67 / IP69 / IP69K |
| Depth | 21.5 mm |
| Detection range | 8 ... 150 mm |
| Detection range max. | 8 ... 150 mm |
| Detection range min. | 8 ... 20 mm |
| Device ID | 0x110802 (1116162) |
| Device profile | Smart Sensor |
| Diagnostic Coverage (DC) | 0 % |
| Diameter of the light spot | approx. 2 mm at a distance of 150 mm |
| FDA approval | IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3 as described in Laser Notice 56, dated May 8, 2019. |
| Function indicator | LED yellow: constantly on - switch output active constantly off - switch output inactive |
| Housing | PC (Polycarbonate) |
| Housing PC (Polycarbonate) Optical face PMMA | Housing | PC (Polycarbonate) | Optical face | PMMA |
| Interface type | IO-Link ( via C/Q = BK ) |
| IO-Link revision | 1.1 |
| Laser class | 1 |
| Laser safety | EN 60825-1:2014 |
| Light source | laser diode |
| Light type | modulated visible red light |
| Mass | approx. 36 g |
| max. pulse energy | 15.2 nJ |
| Min. cycle time | 2.3 ms |
| Mission Time (T M ) | 20 a |
| MTTF d | 560 a |
| Note | LASER LIGHT , DO NOT STARE INTO BEAM |
| Opening angle | approx. 1 ° |
| Operation indicator | LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode |
| Optical face | PMMA |
| Process data width | Process data input 2 Bit Process data output 2 Bit |
| Product standard | EN 60947-5-2 |
| Protection class | III |
| Pulse length | 3 µs |
| Reference target | standard white, 100 mm x 100 mm |
| Repetition rate | approx. 3 kHz |
| Response time | 2.3 ms |
| Signal output | 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected |
| SIO mode support | yes |
| Switching type | The default setting is: C/Q - BK: NPN normally open, PNP normally closed, IO-Link Q2 - WH: NPN normally open, PNP normally closed |
| Transfer rate | COM2 (38.4 kBit/s) |
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| Usage category | DC-12 and DC-13 |
| Wave length | 680 nm |
| Width | 11 mm |
器件图片
技术资料
该型号暂未收录资料。