全部替代型号
查看完整报告技术参数
| 电源 | |
|---|---|
| No-load supply current | I 0 | ≤ 60 mA |
| Operating voltage | U B | 22 ... 253 V DC 22 ... 253 V AC , 47 ... 63 Hz |
| Rated operating current | I e | 3 A |
| 交流 / 直流特性 | |
| Repeat accuracy | ≤ 0.5 % of switching point |
| Response delay | approx. 150 ms |
| Switching frequency | f | ≤ 3 Hz |
| Time delay before availability | t v | ≤ 800 ms |
| Transducer frequency | approx. 175 kHz |
| 环境与封装 | |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Height | 80 mm |
| Height 80 mm Width 34 mm Length 80 mm | Height | 80 mm | Width | 34 mm | Length | 80 mm |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Temperature influence | ± 1 % of full-scale value |
| 其他 | |
| Adjustment range | 90 ... 1500 mm |
| Connection | 5-pin V95 connector (7/8"-16 UN 2A) |
| Dead band | 0 ... 70 mm |
| Degree of protection | IP65 |
| Fusing | ≤ 3 A Slow-blow fuse in accordance with IEC 60127-2 Sheet 5 required. Recommendation: after a short circuit, check that the device is functioning correctly. |
| Housing | PBT |
| Housing PBT Transducer epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT | Housing | PBT | Transducer | epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT |
| LED green | solid green: Power on |
| LED red | normal operation: "fault" program function: no object detected |
| LED yellow | solid: switching state switch output flashing: program function |
| Length | 80 mm |
| Mass | 260 g |
| Output type | 1 relay output |
| Range hysteresis | H | 1 % of the set operating distance |
| Sensing range | 70 ... 1500 mm |
| Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 |
| Standards EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 | Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 |
| Standard target plate | 100 mm x 100 mm |
| Transducer | epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT |
| Width | 34 mm |
器件图片
技术资料
该型号暂未收录资料。