全部替代型号
查看完整报告技术参数
| 电源 | |
|---|---|
| No-load supply current | I 0 | ≤ 15 mA |
| Operating current | I L | 0 ... 200 mA |
| Operating voltage | U B | 10 ... 30 V |
| Voltage drop | U d | ≤ 3 V |
| 交流 / 直流特性 | |
| Switching frequency | f | 1000 Hz |
| 环境与封装 | |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Height | 25 mm |
| Height 25 mm Width 12 mm Length 31 mm | Height | 25 mm | Width | 12 mm | Length | 31 mm |
| 其他 | |
| Assured operating distance | s a | 0 ... 1.215 mm |
| Connection type | Connector plug |
| Degree of protection | IP67 |
| Housing material | Polyamide (PA) |
| Hysteresis | H | typ. 5% |
| Installation | flush |
| Length | 31 mm |
| Note | Use a stop screw combined with a model -F2 sensor from Pepperl+Fuchs GmbH. The maximum actuation speed of the control slide is 0.1 m/s |
| Number of pins | 3 |
| Output polarity | DC |
| Output type | PNP |
| Rated operating distance | s n | 1.5 mm |
| Reverse polarity protection | reverse polarity protected |
| Short-circuit protection | pulsing |
| Standards | EN IEC 60947-5-2 |
| Standards EN IEC 60947-5-2 | Standards | EN IEC 60947-5-2 |
| Switching function | Normally open (NO) |
| Switching state indicator | LED, red |
| Threading | M8 x 1 |
| Threading M8 x 1 Number of pins 3 | Threading | M8 x 1 | Number of pins | 3 |
| UL approval | cULus Listed Load Type: Resistive Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 200 mA |
| Width | 12 mm |
器件图片
技术资料
该型号暂未收录资料。